Hustler FasTrak SDX 48” Cut HU941674EX

The FasTrak SDX is the perfect move for the contractor looking for all day performance at a value price; The FasTrak® SDX comes equipped with an upgraded custom seat, bigger tires, and a Kawasaki FX engine that provides strength and reliability. 

Features

ROPS supplied with unit Toughest frame, front forks, and deck in the industry

Fabricated double reinforced deck

Fabricated one piece chassis

Extra leading edge deck reinforcement

Kawasaki V Twin FX691V engine

18.92 L (5.0 US gal) fuel capacity

Twin Hydro Gear ZT3400 integrated serviceable commercial duty hydro's

Commercial duty sealed deck spindles

SmoothTrak steering: with patented automatic park brake system

Simplest maintenance in the industry

22" Drive and 13" caster tyres

0-14.5 kph (0-9 mph) to get the job done fast

Custom premium bolstered internal suspension seats with operator isolation

Standard hour meter

Fuel gauge

48" cut side-discharge deck with mulch kit option

Tool-lees removable pulley covers

High-back suspension seat

Flip up seat pan

Removable floor pan

 

Specifications

  • Engine: Kawasaki FX691V
  • HP: 22.0 hp (16.4kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Forced air cooled, 90 degree V-twin, OHV vertical shaft normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.2 U.S. qt. (2.1 litre) w/filter
  • Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Fuel Capacity: 18.92 L (5.0 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Dual stage canister air filter
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Commercial-duty Hydro-Gear ZT3400
  • Hydrostatic Drive: V-belt drive from engine crankshaft
  • Ground Speed - Forward: Infinitely variable 0-14.5 kph (0 - 9 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius .Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres: 13 x 5.00 - 5, smooth tread
  • Tyres - Drive: 22 x 9.50 - 10, turf tread
  • Weight: 378 kg (835 lbs)
  • Seat: High-back suspension seat
  • Construction: Mainframe is 1.5" x 3.0" x .125" (38 mm x 76.2 mm x 3.17 mm) rectangular steel tubing. Front axle is fabricated and uses sealed ball bearings. Front caster wheels mounted with heavy duty greasable roller bearings on each wheel. Front caster forks are .375" (9.52 mm) steel.
  • ROPS: Standard
  • Seat Suspension: Yes, internal suspension seat with operator isolation.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Yes, cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 44.3" (1125.2 mm)
  • Overall Length: 73.6" (1869.4 mm)
  • Width: 49.1" (1247.14 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 47" (1193.8 mm)
  • Deck System: Side-Discharge: 48" cut. Free-floating deck using three blades with centre blade to
  • the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 48" cut Side Discharge
  • Deck Lift: Foot-operated deck height adjustment.
  • Deck Construction: 10 ga, .135" (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) double welded onto spindle mount areas. 11ga Front bullnose on deck impact areas on trim edges.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.4 cm, .6 cm increments)
  • Blade(s): (3) Heavy-duty, heat treated, steel blades. 16.50" x 2.2" x .20"
  • Blade Tip Speed: 18,600 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to three spindles. Spring tension idler for extended belt life.
  • Spindles: Aluminium casting with 1.0" (25.4 mm) steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 48": HA121474 - [Includes wavy mulcher blades]. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48"/ 54" / 60": HA933655 - 2 bag catcher [*must order (1) adapter kit below to complete HA933655]. Catcher Adapter Kit 48": HA121074 - 2 bag catcher adapter. Flex Forks 48": HA600213 [2 forks] Light Kit (2015 FasTrak) 48" / 54" / 60": HA121482 - Work later with our optional light kit. Steering Lever Extension Kit: HA333724 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Replacement Blades:- Low Lift: HP601123 Low Lift (Fusion): HP601014 High Lift: HP606252 (Production) High Lift (Fusion): HP795757 Wavy Mulch: HP796623 Gator: HP796631
  • Please Note: Specifications subject to change without notice.

 

 

Hustler FasTrak SDX 54” Cut HU942086EX

The FasTrak SDX has it all, and can do it all; The FasTrak SDX is a true commercial grade mower, built for the pro-sumer or commercial operator who wants more of everything - more horsepower, wider tires, a welded steel deck and neighbourhood braggin' rights. SmoothTrak steering makes operating a breeze - from zero-turning in tight spaces to covering straightaways at an industry-setting 14.5km/h. Most importantly, the FasTrak SDX delivers a professional cut every time. 

Features

ROPS supplied with unit Toughest frame, front forks, and deck in the industry

Fabricated double reinforced deck

Fabricated one piece chassis

Extra leading edge deck reinforcement

Kawasaki V Twin FX691V engine

18.92 L (5.0 US gal) fuel capacity

Twin Hydro Gear ZT3400 integrated serviceable commercial duty hydro's

Commercial duty sealed deck spindles

SmoothTrak steering: with patented automatic park brake system

Simplest maintenance in the industry

22" Drive and 13" caster tyres

0-14.5 kph (0-9 mph) to get the job done fast

Custom premium bolstered internal suspension seats with operator isolation

Standard hour meter

Fuel gauge

54" cut side-discharge deck with mulch kit option

Tool-lees removable pulley covers

High-back suspension seat

Flip up seat pan

Removable floor pan

 

Specifications

  • Engine: Kawasaki FX691V
  • HP: 22.0 hp (16.4kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
  • Standards.)
  • Type: Forced air cooled, 90 degree V-twin, OHV vertical shaft normally aspirated petrol
  • engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.2 U.S. qt. (2.1 litre) w/filter
  • Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers
  • specifications)
  • Fuel Capacity: 18.92 L (5.0 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Dual stage canister air filter
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Commercial-duty Hydro-Gear ZT3400
  • Hydrostatic Drive: V-belt drive from engine crankshaft
  • Ground Speed - Forward: Infinitely variable 0-14.5 kph (0 - 9 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel.
  • Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking.
  • Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres: 13 x 6.50 - 6, smooth tread
  • Tyres - Drive: 23 x 11.00 - 10, turf tread
  • Weight: 390 kg (860 lbs)
  • Seat: High-back suspension seat
  • Construction: Mainframe is 1.5" x 3.0" x .125" (38 mm x 76.2 mm x 3.17 mm) rectangular steel tubing. Front axle is fabricated and uses sealed ball bearings. Front caster wheels mounted with heavy duty greasable roller bearings on each wheel. Front caster forks are .375" (9.52 mm) steel.
  • ROPS: Standard
  • Seat Suspension: Yes, internal suspension seat with operator isolation.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Yes, cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 44.3" (1125.2 mm)
  • Overall Length: 74.42" (1890.26 mm)
  • Width: 55.1" (1399.54 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 52" (1320.8 mm)
  • Deck System: Side-Discharge: 54" cut. Free-floating deck using three blades with centre blade to the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 54" cut Side Discharge
  • Deck Lift: Foot-operated deck height adjustment.
  • Deck Construction: 10 ga, .135" (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) double welded onto spindle mount areas. 11ga Front bullnose on deck impact areas on trim edges
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.4 cm, .6 cm increments)
  • Blade(s): (3) Heavy-duty, heat treated, steel blades. 18.50" x 2.2" x .20"
  • Blade Tip Speed: 18,910 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to three spindles. Spring tension idler for extended belt life.
  • Spindles: Aluminium casting with 1.0" (25.4 mm) steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 54": HA121475 - [Includes wavy mulcher blades]. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48"/ 54" / 60": HA933655 - 2 bag catcher [*must order (1) adapter kit below to complete HA933655]. Catcher Adapter Kit 54": HA121075 - 2 bag catcher adapter. Flex Forks 54" / 60": HA605123 [2 forks] Light Kit (2015 FasTrak) 48" / 54" / 60": HA121482 - Work later with our optional light kit. Steering Lever Extension Kit: HA333724 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Replacement Blades:- Low Lift: HP601124 Low Lift (Fusion): HP601012 High Lift: HP606251 (Production) High Lift (Fusion): HP797696 Wavy Mulch: HP797704 Gator: HP797712
  • Please Note: Specifications subject to change without notice.

Hustler FasTrak SDX 60” Cut HU941708EX

The FasTrak SDX has it all and can do it all; The FasTrak SDX is a true commercial grade mower, built for the pro-sumer or commercial operator who wants more of everything - more horsepower, wider tires, a welded steel deck and neighbourhood braggin' rights. SmoothTrak steering makes operating a breeze - from zero-turning in tight spaces to covering straightaways at an industry-setting 14.5km/h. Most importantly, the FasTrak SDX delivers a professional cut every time. 

Features

ROPS supplied with unit Toughest frame, front forks, and deck in the industry

Fabricated double reinforced deck

Fabricated one piece chassis

Extra leading edge deck reinforcement

Kawasaki V Twin FX691V engine

18.92 L (5.0 US gal) fuel capacity

Twin Hydro Gear ZT3400 integrated serviceable commercial duty hydro's

Commercial duty sealed deck spindles

SmoothTrak steering: with patented automatic park brake system

Simplest maintenance in the industry

22" Drive and 13" caster tyres

0-14.5 kph (0-9 mph) to get the job done fast

Custom premium bolstered internal suspension seats with operator isolation

Standard hour meter

Fuel gauge

60" cut side-discharge deck with mulch kit option

Tool-lees removable pulley covers

High-back suspension seat

Flip up seat pan

Removable floor pan

 

Specifications

  • Engine: Kawasaki FX730V
  • HP: 23.5 hp (17.5kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
  • Standards.)
  • Type: Forced air cooled, 90 degree V-twin, OHV vertical shaft normally aspirated petrol
  • engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.2 U.S. qt. (2.1 litre) w/filter
  • Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers
  • specifications)
  • Fuel Capacity: 18.92 L (5.0 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Dual stage canister air filter
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Commercial-duty Hydro-Gear ZT3400
  • Hydrostatic Drive: V-belt drive from engine crankshaft
  • Ground Speed - Forward: Infinitely variable 0-14.5 kph (0 - 9 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel.
  • Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating,
  • independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking.
  • Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres: 13 x 6.50 - 6, smooth tread
  • Tyres - Drive: 23 x 11.00 - 10, turf tread
  • Weight: 401 kg (885 lbs)
  • Seat: High-back suspension seat
  • Construction: Mainframe is 1.5" x 3.0" x .125" (38 mm x 76.2 mm x 3.17 mm) rectangular steel
  • tubing. Front axle is fabricated and uses sealed ball bearings. Front caster wheels mounted with heavy duty greasable roller bearings on each wheel. Front caster forks are .375" (9.52 mm) steel.
  • ROPS: Standard
  • Seat Suspension: Yes, internal suspension seat with operator isolation.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated
  • parking brakes
  • Cup Holder: Yes, cup holder moulded into the left side fuel tank. Accommodates nearly any cup
  • size.
  • Height: 44.3" (1125.2 mm)
  • Overall Length: 75.92" (1928.36 mm)
  • Width: 61.1" (1551.94 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 52" (1320.8 mm)
  • Deck System: Side-Discharge: 60" cut. Free-floating deck using three blades with centre blade to
  • the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Side Discharge
  • Deck Lift: Foot-operated deck height adjustment.
  • Deck Construction: 10 ga, .135" (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) doubler welded onto
  • spindle mount areas. 11ga Front bullnose on deck impact areas on trim edges
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport
  • position. Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.4 cm, .6 cm increments)
  • Blade(s): (3) Heavy-duty, heat treated, steel blades. 20.50" x 2.2" x .20"
  • Blade Tip Speed: 18,410 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to three spindles. Spring
  • tension idler for extended belt life.
  • Spindles: Aluminium casting with 1.0" (25.4 mm) steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 60": HA121476 - [Includes wavy mulcher blades]. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48"/ 54" / 60": HA933655 - 2 bag catcher [*must order (1) adapter kit below to complete HA933655]. Catcher Adapter Kit 60": HA121076 - 2 bag catcher adapter. Flex Forks 54" / 60": HA605123 [2 forks] Light Kit (2015 FasTrak) 48" / 54" / 60": HA121482 - Work later with our optional light kit. Steering Lever Extension Kit: HA333724 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Replacement Blades:- Low Lift: HP793794 Low Lift (Fusion): HP600901 High Lift: HP606253 (Production) High Lift (Fusion): HP794685 Wavy Mulch: HP794214 Gator: HP794230
  • Please Note: Specifications subject to change without notice.

Hustler X-ONE 54” Cut 941955EX

With the perfect combination of power and versatility, the X-ONE can do it all; We designed the X-ONE mainframe with heavy-gauge rectangular tubing for strength. Then we narrowed the body, allowing the X-ONE to carry three different deck sizes to meet any user's needs. With a top speed of 17 kph, the X-ONE makes quick work of the largest jobs. With VX4 deck technology and SmoothTrak Steering, you get an ultra-clean cut and the famous Hustler feel, unparalleled in the zero-turn industry.

 

Features

ROPS - Folding, supplied with unit

Full suspension seat as standard

54" Cut side discharge deep decks with VX4 technology

Fabricated one-piece chassis

Kawasaki V Twin FX850V engine

Remote heavy-duty canister air cleaner

44.2 L (11.7 US gal) fuel capacity

Parker unitized 12cc/rev pump & 15.9 ci/rev Wheel motors

Transmission mounted fans

24" Drive and 13" caster tyres

0-17 kph (0-10.5 mph) to get the job done fast

SmoothTrak steering with patented automatic park brake system

Very high blade tip speed for beautiful cut - 18,340 fpm

Commercial duty, sealed deck spindles

Standard hour meter

Specifications

  • Engine: Kawasaki FX850V
  • HP: 27.0 hp (20.1 kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
  • Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.1 U.S. qt. (2.0 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 44.2 L (11.7 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, dual stage canister style air cleaner to extend the service interval
  • for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Parker unitized 12cc/rev Pumps & 15.9ci/rev Wheel motors.
  • Pump Drive: V-belt drive from engine crankshaft
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal
  • fittings.
  • Drive Cooling: Transmission mounted fans.
  • Drive Filter: Internal
  • Ground Speed - Forward: Infinitely variable 0-17 kph (0 – 10.5 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel.
  • Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating,
  • independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes.
  • When steering levers are placed in park position, integral park brakes are automatically engaged.
  • Caster Tyres: 13 x 6.5 - 6
  • Tyres - Drive: 24 x 9.5 - 12, turf tread
  • Weight: 573 kg (1265 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat,
  • deck clutch and park brake switches. Stabilizer wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Premium moulded vinyl full suspension seat with armrests. Fore and aft sliding
  • adjustment.
  • Construction: Mainframe is 1.5" x 2.0" x .188" (38 mm x 50.8 mm x 4.7 mm) rectangular steel
  • tubing. Front caster wheels mounted with sealed ball bearings on each wheel. Front caster forks are fabricated 1/2" (12.7 mm) steel.
  • Hour Meter: Standard
  • ROPS: Certified, 2-post, foldable ROPS
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated
  • parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank.
  • Height: 49" (1244.6 mm) With ROPS folded / 71.25" (1724.7 mm) With ROPS up.
  • Overall Length: 82.75" (2101.85 mm)
  • Width: 59.25" (1504.9 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 51" (1295.4 mm)
  • Deck System: Side-Discharge: 54" cut VX4. Free-floating deck using three blades with centre
  • blade to the front. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 54" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height
  • adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 11 ga. + 7 ga. (3mm x 4.6mm). 11 ga. Formed channel with rolled impact
  • areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 10 ga.+ 7 ga. doubler (3mm x 4.6 mm) steel welded onto spindle mount areas. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport
  • position. Height adjustment in .25" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, .6 cm increments).
  • Blade(s): (3) Heavy-duty, blades 18.5" x 2.5" x .20"
  • Blade Tip Speed: 18,340 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring
  • tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberized.
  • Optional accessories available for purchase separately include: Mulch Kit 54": HA124311 - includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48" / 54" / 60": HA935783 - 3 bag catcher [*must order (1) adapter kit below to complete 935783]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 54": HA123778 Kit Light: 48" / 54" / 60": HA123549 Steering Lever Extension Kit: HA122760 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti-Scalp (single) 48" / 54" / 60": HA113910 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537 Replacement Blades:- Low Lift: HP601124 (Production) Low Lift (Fusion): HP601012 High Lift: HP606251 High Lift (Fusion): HP797696 Wavy Mulch: HP797704 Gator: HP797712
  • Please Note: Specifications subject to change without notice.

 

 

 

Hustler X-ONE 60” Cut EFI 940197EX

With the perfect combination of power and versatility, the X-ONE can do it all; We designed the X-ONE mainframe with heavy-gauge rectangular tubing for strength. Then we narrowed the body, allowing the X-ONE to carry three different deck sizes to meet any user's needs. With a top speed of 17 kph, the X-ONE makes quick work of the largest jobs. With VX4 deck technology and SmoothTrak Steering, you get an ultra-clean cut and the famous Hustler feel, unparalleled in the zero-turn industry. 

 

Features

ROPS - Folding, supplied with unit Full suspension seat as standard

60" Cut side discharge deep decks with VX4 technology

Fabricated one-piece chassis

Kawasaki V Twin FX850V engine

Remote heavy-duty canister air cleaner

44.2 L (11.7 US gal) fuel capacity

Parker unitized 12cc/rev pump & 15.9 ci/rev Wheel motors

Transmission mounted fans

24" Drive and 13" caster tyres

0-17 kph (0-10.5 mph) to get the job done fast

SmoothTrak steering with patented automatic park brake system

Very high blade tip speed for beautiful cut - 18,410 fpm

Commercial duty, sealed deck spindles

Standard hour meter

 

Specifications

  • Engine: Kawasaki FX850V
  • HP: 27.0 hp (20.1 kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
  • Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.1 U.S. qt. (2.0 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 44.2 L (11.7 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, dual stage canister style air cleaner to extend the service interval
  • for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Parker unitized 12cc/rev Pumps & 15.9ci/rev Wheel motors.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal
  • fittings.
  • Drive Cooling: Transmission mounted fans.
  • Ground Speed - Forward: Infinitely variable 0-17 kph (0 – 10.5 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel.
  • Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating,
  • independent drive wheels
  • Brakes: "In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes.
  • When steering levers are placed in park position, integral park brakes are automatically engaged."
  • Caster Tyres: 13 x 6.5 - 6
  • Tyres - Drive: 24 x 9.5 - 12, turf tread
  • Weight: 581.5 kg (1282 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat,
  • deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Premium moulded vinyl full suspension seat with armrests. Fore and aft sliding
  • adjustment.
  • Construction: Mainframe is 1.5" x 2.0" x .188" (38 mm x 50.8 mm x 4.7 mm) rectangular steel
  • tubing. Front caster wheels mounted with sealed ball bearings on each wheel. Front caster forks are fabricated 1/2" (12.7 mm) steel.
  • Hour Meter: Standard
  • ROPS: Certified, 2-post, foldable ROPS
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated
  • parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank.
  • Height: 49" (1244.6 mm) With ROPS folded / 71.25" (1724.7 mm) With ROPS up.
  • Overall Length: 82.75" (2101.85 mm)
  • Width: 62" (1574.8 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 54.5" (1384.3 mm)
  • Deck System: Side-Discharge: 60" cut VX4. Free-floating deck using three blades with centre
  • blade to the front. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height
  • adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 11 ga. + 7 ga. (3mm x 4.6mm). 11 ga. Formed channel with rolled impact
  • areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 10 ga.+ 7 ga. doubler (3mm x 4.6 mm) steel welded onto spindle mount areas. High density, rubberised discharge chute.
  • Cutting Height(s): "Foot-operated deck height adjustment. Pin for setting height, detent for transport
  • position. Height adjustment in .25" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, .6 cm increments) "
  • Blade(s): (3) Heavy-duty, blades 20.5" x 2.5" x .20"
  • Blade Tip Speed: 18,410 fpm
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: Chute: High density, rubberised.
  • "Optional accessories available for purchase separately include: Mulch Kit 54": HA124311 - includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48" / 54" / 60": HA935783 - 3 bag catcher [*must order (1) adapter kit below to complete 935783]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 54": HA123779 Kit Light: 48" / 54" / 60": HA123549 Steering Lever Extension Kit: HA122760 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti-Scalp (single) 48" / 54" / 60": HA113910 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537" Replacement Blades:- High Lift (Fusion): HP794685 (Production) Extra High Lift (Fusion): HP602771 Sand: HP603875 Catching: HP603848 Wavy Mulch: HP794214 Gator: HP794230
  • Please Note: Specifications subject to change without notice.

Hustler Super Z 54” Cut 942938EX

Super Z is in a class of its own; Powered by a Kawasaki FX850 V-Twin engine. It’s built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 22.5 km/h. The drive system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability of our VX4 technology with this version of the model featuring a side discharge deck option giving you the best-finished appearance to complement its’ industrial muscle. With professionals in mind, comfort is a high priority. Super Z has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market.

 

Features

ROPS - Folding, supplied with unit

Grammer bolstered suspension seat

54" Cut side discharge VX4 Clean-Cut deep deck technology

Fabricated one piece chassis

Kawasaki premium commercial V Twin FX850V engine

Remote dual stage canister air cleaner

45.4 L (12 US gal) fuel capacity

Drive System - industrial grade pumps and motors

21cc Hydrogear PY pumps and Parker TG310 wheel motors

Fan forced hydro oil cooler

24" Drive and 13" pneumatic caster tyres

0-22.5 kph (0-14 mph) to get the job done fast

SmoothTrak steering - responsive precise control

Very high blade tip speed for beautiful cut- 18,630 fpm

Commercial duty, sealed deck spindles

Standard hour Meter

 

Specifications

  • Engine: Kawasaki FX850V
  • HP: 27.0 hp (20.1kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.5 U.S. qt. (2.4 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 45.4 L (12 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, 21cc pumps. Each pump powers one drive-wheel. Hydro Gear PY Pumps
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG310 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-22.5 kph (0 - 14 mph)
  • Ground Speed - Reverse: 0-9.7 kph (0-6 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking.
  • Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Tyres - Front: 13 x 6.5 - 6, smooth
  • Tyres - Drive: 24 x 9.5 - 12, turf tread
  • Weight: 676.3 kg (1491 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Grammer bolstered suspension seat.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 84.5" (2146 mm)
  • Width: 60" (1524 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 57" (1447.8 mm)
  • Deck System: Side-Discharge: 54" cut VX4. Free-floating deck using three blades with centre blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 54" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 11 ga. + 11 ga. + 7 ga. (3mm x 3 mm x 4.6mm). Solid 1.5" x .375" (38 mm x 9.5 mm) steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 11 ga. doubler + 7 ga. tripler (3mm x 4.6 mm) steel welded onto spindle mount areas. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment.
  • Pin for setting height, detent for transport position. Height adjustment in 1/4" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
  • Blade(s): (3) Heavy-duty blades 18.5”x2.5”x2.0”
  • Blade Tip Speed: 18,630 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 54": HA113721 - includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 54”/ 60" : HA935478 - 3 bag catcher [*must order (1) adapter kit below to complete 932467]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 54": HA121923 Hydraulic Deck Lift: HA113932 Kit Light: 54”/ 60" : HA110153 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA603167 [2 forks] Rear Anti-Scalp (single) 54": HA113910 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537 Replacement Blades:- Low Lift: HP601124 Low Lift (Fusion): HP601012 High Lift (Fusion): HP797696 (Production) Wavy Mulch: HP797704 Gator: HP797712
  • Please Note: Specifications subject to change without notice.

 

Hustler Super Z 60” Cut 942839EX

Super Z is in a class of its own; Powered by a Kawasaki FX850 V-Twin engine. It’s built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 22.5 km/h. The drive system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability of our VX4 technology with this version of the model featuring a side discharge deck option giving you the best-finished appearance to complement its’ industrial muscle. With professionals in mind, comfort is a high priority. Super Z has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market

Features

ROPS - Folding, supplied with unit

Gramer bolstered suspension seat

60" Cut side discharge VX4 Clean-Cut deep deck technology

Fabricated one-piece chassis.

Kawasaki premium commercial duty V Twin FX850V engine.

Remote dual stage canister air cleaner.

45.4 L (12 US gal) fuel capacity.

Drive System - industrial grade pumps and motors.

21cc Hydro Gear PY pumps and Parker TG310 wheel motors

Fan forced hydro oil cooler.

24" Drive and 13" pneumatic caster tyres.

0-22.5 kph (0-14 mph) to get the job done fast.

SmoothTrak steering - responsive precise control.

Very high blade tip speed for beautiful cut - 18,630 fpm.

Commercial duty, sealed deck spindles

Standard hour meter.

 

Specifications

  • Engine: Kawasaki FX850V
  • HP: 27.0 hp (20.1kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
  • Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.5 U.S. qt. (2.4 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 45.4 L (12 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, 21cc pumps. Each pump powers one drive-wheel. Hydro Gear PY Pumps
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG310 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-22.5 kph (0 - 14 mph)
  • Ground Speed - Reverse: 0-12.1 kph (0-7.5 mph) Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes.
  • When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Tyres - Front: 13 x 6.5 - 6, smooth
  • Tyres - Drive: 24 x 12 - 12, turf tread
  • Weight: 685 kg (1511 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat,
  • deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Grammer bolstered suspension seat.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 84.5" (2146 mm)
  • Width: 66" (1676 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 57" (1447.8 mm)
  • Deck System: Side-Discharge: 60" cut VX4. Free-floating deck using three blades with centre blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height
  • adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 11 ga. + 11 ga. + 7 ga. (3mm x 3 mm x 4.6mm). Solid 1.5" x .375" (38
  • mm x 9.5 mm) steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 11 ga. doubler + 7 ga. tripler (3mm x 4.6 mm) steel welded onto spindle mount areas. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport
  • position.
  • Blade(s): (3) Heavy-duty blades 20.5" x 3.00" x .25"
  • Blade Tip Speed: 18,630 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring
  • tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 60": HA124314 - includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 54”/ 60”: HA937912 - 3 bag catcher [*must order (1) adapter kit below to complete 937912]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 60": HA123781 Hydraulic Deck Lift: HA124485 Kit Light:54”/ 60”: HA123549 Steering Lever Extension Kit: HA122760 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti-Scalp (single) 60": HA113910 Rear Anti-Scalp (dual) 60" deck: HA113911 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537 Replacement Blades:- Low Lift: HP793794 Low Lift (Fusion): HP600901 High Lift (Fusion): HP794685 Extra High Lift (Fusion): HP602771 (Production) Wavy Mulch: HP794214 Gator: HP794230
  • Please Note: Specifications subject to change without notice.

 

Hustler Super Z 60” Cut Rear Discharge HU938126EX

Super Z is in a class of its’ own; Powered by Kawasaki’s FX850 V-Twin engine. It’s built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 22.5 km/h. The Drive system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability with this version of the model featuring a rear discharge deck option giving you the best-finished appearance to complement its’ industrial muscle. With professionals in mind, comfort is a high priority. Super Z has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market

 

Features

ROPS - Folding, supplied with unit

Grammer bolstered suspension seat

60" Cut rear discharge deck

Fabricated one piece chassis

Kawasaki premium commercial duty V Twin FX850V engine

Remote dual stage canister air cleaner

45.4 L (12 US gal) fuel capacity

Drive System -industrial grade pumps and motors

21cc Hydro Gear PY pumps and Parker TG310 wheel motors

Fan forced hydro oil cooler

24" Drive and 13" pneumatic caster tyres

0-22.5 kph (0-14 mph) to get the job done fast

Smoothtrak steering - responsive precise control

Very high blade tip speed for beautiful cut - 18,630 fpm

Commercial duty, sealed deck spindles

Standard hour meter

 

Specifications

  • Engine: Kawasaki FX850V
  • HP: 27.0 hp (20.1kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.5 U.S. qt. (2.4 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 45.4 L (12 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, 21cc pumps. Each pump powers one drive-wheel .Hydro Gear PY Pumps
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG310 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-22.5 kph (0 - 14 mph)
  • Ground Speed - Reverse: 0-12.1 kph (0-7.5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Tyres - Front: 13 x 6.5 - 6, smooth tread
  • Tyres - Drive: 24 x 12 - 12, turf tread
  • Weight: 685 kg (1511 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Grammer bolstered suspension seat.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 84.5" (2146 mm)
  • Width: 66" (1676 mm)
  • Width (tyre-to-tyre): 57" (1447.8 mm)
  • Deck System: Rear-Discharge: 60" cut deck. Free-floating deck using three blades with centre blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Rear Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 11 ga. + 11 ga. + 7 ga. (3mm x 3 mm x 4.6mm). Solid 1.5" x .375" (38 mm x 9.5 mm) steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 11 ga. doubler + 7 ga. tripler (3mm x 4.6 mm) steel welded onto spindle mount areas. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment.
  • Pin for setting height, detent for transport position. Height adjustment in 1/4" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
  • Blade(s): (3) Heavy-duty, heat treated blades 1 qty x 20.5" L-F-CCW and 2 qty x 20.5" L-F-CW
  • Blade Tip Speed: 18,630 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Optional accessories available for purchase separately include: Mulch kit HA113721 Hydraulic Deck Lift: HA113932 Kit Light:54”/ 60" : HA117147 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA603167 [2 forks] Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537 Replacement Blades:- Low Lift Counter Clockwise (Fusion): HP795633 (Production) Low Lift Clockwise (Fusion): HP600901 (Production) Wavy Mulch Counter Clockwise: HP604163 Wavy Mulch Clockwise: HP794214 Gator Counter Clockwise: HP601928 Gator Clockwise: HP794230
  • Please Note: Specifications subject to change without notice.

Hustler Super Z HyperDrive EFI 60” Cut HU937003EX

Super Z™ is in a class of its' own; Powered by Briggs & Stratton Vanguard Big Block V-Twin EFI Engine It's built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 25.7 km/h. The HyperDrive™ hydraulic system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability of our VX4® technology with this version of the model featuring a side discharge deck option giving you the best-finished appearance to complement its' industrial muscle. With professionals in mind, comfort is a high priority. Super Z™ has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market.

 

Features

ROPS - Folding, supplied with unit. Six-way adjustable premium Grammer suspension

seat with operator isolation.

60" Cut side discharge VX4 Clean-Cut deep deck technology.

Fabricated one-piece chassis.

Briggs & Stratton Big Block premium commercial duty V Twin EFI engine

Remote dual stage canister air cleaner.

44.2 L (11.7 US gal) fuel capacity.

HyperDrive Hydro System - industrial grade pumps and motors.

Industrial slipper piston pumps and separate drive motors.

Fan forced hydro oil cooler.

26" Drive and 13" pneumatic caster tyres.

0-25.7 kph (0-16 mph) to get the job done fast.

Smooth Trak steering - responsive precise control.

Very high blade tip speed for beautiful cut - 18,630 fpm.

Commercial duty, sealed deck spindles.

Standard hour meter.

Specifications

 

  • Engine: Briggs & Stratton Big Block 37hp EFI
  • HP: 37.0 hp (993cc) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1940 Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 44.2 L (11.7 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel.
  • Sauer Danfoss DDC-20
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG280 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-25.7 kph (0 - 16 mph)
  • Ground Speed - Reverse: 0-12.1 kph (0-7.5 mph)
  • Steering: Smooth Trak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Caster Tyres: 13 x 6.5 - 6, smooth tread
  • Tyres - Drive: 26 x 12 - 12, turf tread
  • Weight: 791.5kg (1745 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Six-way adjustable premium Grammer suspension seat with operator isolator platform.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with Tapered roller bearings on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel with Tapered roller bearings.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 84.5" (2146.3 mm)
  • Width: 66" (1676.4 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 57" (1447.8 mm)
  • Deck System: Side-Discharge: 60" cut VX4. Free-floating deck using three blades with centre
  • blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily
  • Deck Construction: Welded steel 7 ga. (4.6mm). Formed 11 ga (3mm) steel bars reinforce impact areas on
  • trim edges. Commercial-style box-section reinforced front edge. Reinforcements 7 ga stamped disc (4.6 mm) steel welded onto spindle mount. Total of 3/8” thickness around spindle mounts. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position.
  • Blade(s): (3) Heavy-duty blades 20.5" x 3.00" x .25"
  • Blade Tip Speed: 18,630 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring
  • tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional Accessories: Replacement Blades:-
  • Low Lift: HP793794 Low Lift (Fusion): HP600901 High Lift (Fusion): HP794685 Extra High Lift (Fusion): HP602771 (Production) Wavy Mulch: HP794214 Gator: HP794230 Optional Accessories: Mulch Kit 60": HA124314 - includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 60" / 66" / 72": HA937912 - 3 bag catcher [*must order (1) adapter kit below to complete 932468]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 60": HA123779 Hydraulic Deck Lift: HA124485 Kit Light: 60" / 66" / 72": HA123549 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti-Scalp (single) 60" / 66" / 72": HA113910 Rear Anti-Scalp (dual) 60" deck: HA113937 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537– Come with STD wheel bearings Hitch kit 60”/ 66” / 72” /60” RD: HA123915
  • Please Note: Specifications subject to change without notice.

Hustler Super Z HyperDrive EFI 72” cut HU937037

Super Z™ is in a class of its' own; Powered by Briggs & Stratton Vanguard Big Block V-Twin EFI Engine It's built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 25.7 km/h. The HyperDrive™ hydraulic system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability of our VX4® technology with this version of the model featuring a side discharge deck option giving you the best-finished appearance to complement its' industrial muscle. With professionals in mind, comfort is a high priority. Super Z™ has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market

 

Features

ROPS - Folding, supplied with unit. Six-way adjustable premium Grammer suspension seat with operator isolation.

60" Cut side discharge VX4 Clean-Cut deep deck technology.

Fabricated one-piece chassis.

Briggs & Stratton Big Block premium commercial duty V Twin EFI engine

Remote dual stage canister air cleaner.

44.2 L (11.7 US gal) fuel capacity.

HyperDrive Hydro System - industrial grade pumps and motors.

Industrial slipper piston pumps and separate drive motors.

Fan forced hydro oil cooler.

26" Drive and 13" pneumatic caster tyres.

0-25.7 kph (0-16 mph) to get the job done fast.

Smooth Trak steering - responsive precise control.

Very high blade tip speed for beautiful cut - 18,630 fpm.

Commercial duty, sealed deck spindles.

Standard hour meter.

Specifications

  • Engine: Briggs & Stratton Big Block 37hp EFI
  • HP: 37.0 hp (993cc) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1940 Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel. Sauer Danfoss DDC-20
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG280 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-25.7 kph (0 - 16 mph)
  • Ground Speed - Reverse: 0-12.1 kph (0-7.5 mph)
  • Steering: Smooth Trak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Caster Tyres: 13 x 6.5 - 6, smooth tread
  • Tyres - Drive: 26 x 12 - 12, turf tread
  • Weight: 818 kg (1805 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Six-way adjustable premium Grammer suspension seat with operator isolator platform.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with Tapered roller bearings on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel with Tapered roller bearings.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 86.7" (2202 mm)
  • Width: 78" (1981 mm) w/discharge chute up
  • Width (tyre-to-tyre): 60" (1524 mm)
  • Deck System: Side-Discharge: 72" cut VX4. Free-floating deck using three blades with centre blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 72" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 7 ga. (4.6mm). Formed 11 ga (3mm) steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 7 ga stamped disc (4.6 mm) steel welded onto spindle mount. Total of 3/8” thickness around spindle mounts. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in 1/4" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
  • Blade(s): (3) Heavy-duty blades 24.5" x 3.00" x .25"
  • Blade Tip Speed: 18,530 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring tension idler and large pulleys to extend belt life
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional Accessories: Mulch Kit 72": HA124316- includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 60" / 66" / 72": HA937912 - 3 bag catcher [*must order (1) adapter kit below to complete 123781]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 72": HA123781 Hydraulic Deck Lift: HA124485 Kit Light: 60" / 66" / 72": HA123549 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti-Scalp (single) 60" / 66" / 72": HA113910 Rear Anti-Scalp (dual) 60" deck: HA113937 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537– Come with STD wheel bearings Hitch kit 60”/ 66” / 72” /60” RD: HA123915 Replacement Blades:- High Lift (Fusion): HP602857 (Production) Extra High Lift (Fusion): HP798702 Wavy Mulch: HP798710 Gator: HP798728
  • Please Note: Specifications subject to change without notice.

 

Hustler Super Z HyperDrive 60” Cut HU937060EX

Super Z™ is in a class of its' own; Powered by Kawasaki's FX1000 V-Twin engine. It's built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 25.7 km/h. The HyperDrive™ hydraulic system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability of our VX4® technology with this version of the model featuring a side discharge deck option giving you the best-finished appearance to complement its' industrial muscle. With professionals in mind, comfort is a high priority. Super Z™ has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market.

Features

ROPS - Folding, supplied with unit

Six-way adjustable premium Grammer suspension seat with operator isolation

60" Cut side discharge VX4 Clean-Cut deep deck technology

Fabricated one-piece chassis

Kawasaki premium commercial duty V Twin FX1000V engine

Remote dual stage canister air cleaner

44.2 L (11.7 US gal) fuel capacity

HyperDrive Hydro System: industrial grade pumps and motors

Industrial slipper piston pumps and separate drive motors

Fan forced hydro oil cooler

26" Drive and 13" pneumatic caster tyres

0-25.7 kph (0-16 mph) to get the job done fast

Smooth Trak steering - responsive precise control

Very high blade tip speed for beautiful cut - 18,530 fpm

Commercial duty, sealed deck spindles

Standard hour meter

 

Specifications

  • Engine: Kawasaki FX1000V
  • HP: 35.0 hp (26.1kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 44.2 L (11.7 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel.
  • Sauer Danfoss DDC-20
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG280 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-25.7 kph (0 - 16 mph)
  • Ground Speed - Reverse: 0-12.1 kph (0-7.5 mph)
  • Steering: Smooth Trak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes.
  • When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Caster Tyres: 13 x 6.5 - 6, smooth tread
  • Tyres - Drive: 26 x 12 - 12, turf tread
  • Weight: 692 kg (1525.6 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat,
  • deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Six-way adjustable premium Grammer suspension seat with operator isolator platform.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with Tapered roller bearings on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel with Tapered roller bearings.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 84.5" (2146.3 mm)
  • Width: 66" (1676.4 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 57" (1447.8 mm)
  • Deck System: Side-Discharge: 60" cut VX4. Free-floating deck using three blades with centre blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height
  • adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 7 ga. (4.6mm). Formed 11 ga (3mm) steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 7 ga stamped disc (4.6 mm) steel welded onto spindle mount. Total of 3/8” thickness around spindle mounts. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in 1/4" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
  • Blade(s): (3) Heavy-duty blades 20.5" x 3.00" x .25"
  • Blade Tip Speed: 18,530 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional Accessories: Low Lift: HP793794
  • Low Lift (Fusion): HP600901 High Lift (Fusion): HP794685 Extra High Lift (Fusion): HP602771 (Production) Wavy Mulch: HP794214 Gator: HP794230 Optional Accessories: Mulch Kit 60": HA124314 - includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 60" / 66" / 72": HA937912 - 3 bag catcher [*must order (1) adapter kit below to complete 932468]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 60": HA123779 Hydraulic Deck Lift: HA124485 Kit Light: 60" / 66" / 72": HA123549 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti-Scalp (single) 60" / 66" / 72": HA113910 Rear Anti-Scalp (dual) 60" deck: HA113937 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537– Come with STD wheel bearings Hitch kit 60”/ 66” / 72” /60” RD: HA123915 Replacement Blades:-
  • Please Note: Specifications subject to change without notice.

Hustler Super Z HyperDrive 72” Cut HU937086EX

Super Z™ is in a class of its' own; Powered by Kawasaki's FX1000 V-Twin engine. It's built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 25.7 km/h. The HyperDrive™ hydraulic system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability of our VX4® technology with this version of the model featuring a side discharge deck option giving you the best-finished appearance to complement its' industrial muscle. With professionals in mind, comfort is a high priority. Super Z™ has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market.
Stock Code: hu937086ex

Features

ROPS - Folding, supplied with unit

Six-way adjustable premium Grammer suspension seat with operator isolation

72" Cut side discharge VX4 Clean-Cut deep deck technology

Fabricated one-piece chassis

Kawasaki premium commercial duty V Twin FX1000V engine

Remote dual stage canister air cleaner

44.2 L (11.7 US gal) fuel capacity

HyperDrive Hydro System - industrial grade pumps and motors

Industrial slipper piston pumps and separate drive motors

Fan forced hydro oil cooler

26" Drive and 13" pneumatic caster tyres

0-25.7 kph (0-16 mph) to get the job done fast

Smooth Trak steering - responsive precise control

Very high blade tip speed for beautiful cut - 18,530 fpm

Commercial duty, sealed deck spindles

Standard hour meter

 

Specifications

  • Engine: Kawasaki FX1000V
  • HP: 35.0 hp (26.1kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 44.2 L (11.7 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel.
  • Sauer Danfoss DDC-20
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings
  • .
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG280 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-25.7 kph (0 - 16 mph)
  • Ground Speed - Reverse: 0-12.1 kph (0-7.5 mph)
  • Steering: Smooth Trak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Caster Tyres: 13 x 6.5 - 6, smooth tread
  • Tyres - Drive: 26 x 12 - 12, turf tread
  • Weight: 719 kg (11585.12 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Six-way adjustable premium Grammer suspension seat with operator isolator platform.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with Tapered roller bearings. on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel with Tapered roller bearings.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 86.7" (2202 mm)
  • Width: 78" (1981 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 60" (1524 mm)
  • Deck System: Side-Discharge: 72" cut VX4. Free-floating deck using three blades with centre blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 72" cut Side Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 7 ga. (4.6mm). Formed 11 ga (3mm) steel bars reinforce impact areas on
  • trim edges. Commercial-style box-section reinforced front edge. Reinforcements 7 ga stamped disc (4.6 mm) steel welded onto spindle mount. Total of 3/8” thickness around spindle mounts. High density, rubberised discharge chute.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in 1/4" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
  • Blade(s): (3) Heavy-duty blades 24.5" x 3.00" x .25"
  • Blade Tip Speed: 18,530 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional Accessories: Mulch Kit 72": HA124316 - includes wavy mulch blades. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 60" / 66" / 72": HA937912 - 3 bag catcher [*must order (1) adapter kit below to complete 932468]. Easy-on, easy-off hopper assemblies. Catcher Adapter Kit 72": HA123781 Hydraulic Deck Lift: HA124485 Kit Light: 60" / 66" / 72": HA123549 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Rear Anti-Scalp (single) 60" / 66" / 72": HA113910 Rear Anti-Scalp (dual) 60" deck: HA113937 Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537 – Come with STD wheel bearings Hitch kit 60”/ 66” / 72” /60” RD: HA123915 Replacement Blades:- High Lift (Fusion): HP602857 (Production) Extra High Lift (Fusion): HP798702 Wavy Mulch: HP798710 Gator: HP798728
  • Please Note: Specifications subject to change without notice.

Hustler Super Z HyperDrive 60” Cut Rear Discharge HU937078EX

Super Z™ is in a class of its' own; Powered by Kawasaki's FX1000 V-Twin engine. It's built like a tank with welded steel decks and rides like a thoroughbred at a top speed of 25.7 km/h. The HyperDrive™ hydraulic system is engineered to run at higher PSI levels giving you better handling with industrial grade pumps and motors. One look under the deck reveals the strength and durability with this version of the model featuring a rear discharge deck option giving you the best-finished appearance to complement its' industrial muscle. With professionals in mind, comfort is a high priority. Super Z™ has a premium seat with suspension and lumbar adjustment. Combine this with semi-pneumatic tyres and you have the most comfortable ride on the best ZTR on the market.

 

Features

ROPS - Folding, supplied with unit

Six-way adjustable premium Grammer suspension seat with operator isolation

60" Cut rear discharge deck

Fabricated one-piece chassis

Kawasaki premium commercial duty V Twin FX1000V engine

Remote dual stage canister air cleaner

44.2 L (11.7 US gal) fuel capacity

HyperDrive Hydro System: industrial grade pumps and motors

Industrial slipper piston pumps and separate drive motors

Fan forced hydro oil cooler

26" Drive and 13" pneumatic caster tyres

0-25.7 kph (0-16 mph) to get the job done fast

Smooth Trak steering - responsive precise control

Very high blade tip speed for beautiful cut - 18,630 fpm

Commercial duty, sealed deck spindles

Standard hour meter

 

Specifications

  • Engine: Kawasaki FX1000V
  • HP: 35.0 hp (26.1kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Air cooled, 90-degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturers specifications)
  • Fuel Capacity: 44.2 L (11.7 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors.
  • Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel Sauer Danfoss DDC-20
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
  • Drive Cooling: Transmission drive (oil) cooler for increased system life. Large capacity cooler with 9" (228 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG280 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-25.7 kph (0 - 16 mph)
  • Ground Speed - Reverse: 0-12.1 kph (0-7.5 mph)
  • Steering: Smooth Trak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged.
  • Caster Tyres: 13 x 6.5 - 6, smooth tread
  • Drive Tyres: 26 x 12 - 12, turf tread
  • Weight: 723kg (1593.94 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Six-way adjustable premium Grammer suspension seat with isolator platform.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with Tapered roller bearings on each wheel. Front caster forks are 1/2" (12.7 mm) fabricated steel with Tapered roller bearings.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Overall Length: 84.5" (2146 mm)
  • Width: 66" (1676 mm)
  • Width (tyre-to-tyre): 57" (1447.8 mm)
  • Deck System: Rear-Discharge: 60" cut deck. Free-floating deck using three blades with centre blade to the front. Mower deck is suspended at the corners. Includes three standard deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Rear Discharge
  • Deck Lift: Raise and lower deck from the driver's seat with a simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climbing curbs and trailer more easily.
  • Deck Construction: Welded steel 7 ga. (4.6mm). Formed 11 ga (3mm) steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge. Reinforcements 7 ga stamped disc (4.6 mm) steel welded onto spindle mount. Total of 3/8” thickness around spindle mounts.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport
  • position. Height adjustment in 1/4" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
  • Blade(s): (3) Heavy-duty, heat treated blades 1 qty x 20.5" L-F-CCW and 2 qty x 20.5" L-F-CW
  • Blade Tip Speed: 18,630 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to all three spindles. Spring tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Optional Accessories: Optional accessories available for purchase separately include:
  • Mulch Kit 60": HA122555 - includes wavy mulch blades. Hydraulic Deck Lift: HA124485 Kit Light: 60" / 66" / 72": HA123549 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flex Forks: HA606696 [2 forks] Semi-Pneumatic tyre 13 x 6.5 - 6: HA789537 – Come with STD wheel bearings Hitch kit 60”/ 66” / 72” /60” RD: HA123915 Replacement Blades:- Low Lift Counter Clockwise (Fusion): HP795633 (Production) Low Lift Clockwise (Fusion): HP600901 (Production) Wavy Mulch Counter Clockwise: HP604163 Wavy Mulch Clockwise: HP794214 Gator Counter Clockwise: HP601928 Gator Clockwise: HP794230
  • Please Note: Specifications subject to change without notice.

Hustler Super 104 HU931733EX

The Super 104 is an affordable wide-area mower with the maneuverability of a zero-turn; Features include premium Kawasaki engine, 104" cutting width, Hyper-Drive System, Grammer premium suspension seat (standard), simple, service friendly design, and hydraulic wing deck lift. The Super 104 can mow up to 84 acres in 8 hours at 17km/h and will mow where most wide-area mowers cannot.

Features

ROPS - Folding, supplied with unit

Grammer Premium Suspension Seat with operator isolation

HyperDrive Hydro System - industrial grade pumps and motors

SmoothTrak steering - responsive precise control

Kawasaki FX1000V premium commercial duty engine

0-17.7 kph (11 mph) top speed - get the job done fast

Hydraulic wing deck lift

Remote air cleaner

104" Rear discharge deck - Wide area cut

45.4 L (12 US gal) fuel capacity

26" Drive and 15" pneumatic caster tyres

Fan forced hydro oil cooler

Commercial duty, sealed deck spindles

Simple design

 

Specifications

  • Engine: Kawasaki FX1000V
  • HP: 35.0 hp (26.1kW) @ 3600 RPM engine speed
  • Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
  • Fuel: Unleaded fuel (see engine manufacturer's specifications)
  • Fuel Capacity: 45.4 L (12 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
  • Cooling: Air cooled. Flywheel fan
  • Governor: Mechanical
  • PTO Clutch: 250 ft lbs
  • Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 15W50 Mobil 1 synthetic motor oil. Transmission drive (oil) cooler for increased system life.
  • Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel. Sauer Danfoss DDC-20
  • Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
  • Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
  • Drive Cooling: Large capacity cooler with 9" (228.6 mm) fan for extended hydraulic life.
  • Drive Filter: Internal
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG0360 with hot oil shuttle.
  • Ground Speed - Forward: Infinitely variable 0-17.7 kph (0 - 11 mph)
  • Ground Speed - Reverse: 0-12.07 kph (0-7.5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in park position, integral park brakes are automatically engaged.
  • Caster Tyres: 15 x 6.0 - 6, rib tread
  • Tyres - Drive: 26 x 12 - 12, turf tread
  • Hydraulic Capacity: Oil - 11.36 L (3 US gal)
  • Weight: 1065.9 kg (2350 lbs)
  • Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
  • Seat: Grammer suspension seat with isolator platform.
  • Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are .5" (12.7 mm) steel.
  • Hour Meter: Standard
  • ROPS: Standard foldable ROPS with seatbelt.
  • Seat Suspension: Standard
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Indicators: Hour meter, engine warning light.
  • Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
  • Width: With wings down: 106.1" (2695 mm) With wings up at gauge wheels: 80.0" (2032 mm) With wings up at deck base: 72.5" (1842 mm)
  • Width (tyre-to-tyre): 60.3" (1532 mm)
  • Deck System: Rear-Discharge: 104" cut deck. Free-floating deck using five blades. Centre deck is suspended at the corners, houses three blades and includes five deck mounted adjustable anti-scalp rollers. Two wing decks house one blade each and are attached to the centre deck with pivoting mounts. Outside of wings are suspended with adjustable casters and have one adjustable anti-scalp wheel each.
  • Cutting Widths: 104" Rear Discharge.
  • Deck Lift: Hydraulic powered deck and wing lift. Raise and lower deck from driver's seat with simple foot-operated deck height switch. Pin for setting height, transport position. Change cutting heights, climb curbs and trailer more easily. Raise and lower deck wings with a hand operated switch on the instrument panel.
  • Deck Construction: Welded steel. Solid 1.5" x .375" (38 mm x 9.5 mm) steel bars reinforce impact areas on trim edges. Gusset style box section reinforces front edges. Reinforcements welded onto spindle mount areas.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
  • Blade(s): (5) Heavy-duty, heat treated, low-lift steel Fusion blades
  • 1 x 23.86" x 2.50" x .203" CW cut 1 x 23.86" x 2.50" x .203" CCW cut 1 x 20.50" x 2.50" x .203" CW cut 2 x 20.50" x 2.50" x .203" CW cut
  • Blade Tip Speed: 15,800 fpm
  • Blade Drive: Belt drive from engine with electric clutch to centre deck spindle. Belt drive from centre deck outer spindles to each wing. Spring tension idler and large pulleys to extend belt life.
  • Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
  • Width of Cut: 103.75" (2635 mm)
  • Trim Capacity: 22.0" 558.8 mm) [left side] 22.0" 558.8 mm) [right side]
  • Optional Accessories: Optional accessories available for purchase separately include:
  • Mulch Kits 104": HA117257 - includes wavy mulch blades. Kit Light: HA110153 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flasher Kit: HA110469 Beacon Kit: HA110467 Gator Mulcher Blades Centre Deck Use: HP601928 x 1 & HP794230 x 2 Gator Mulcher Blades Left Deck Use: HP601929 x 1 Gator Mulcher Blades Right Deck Use: HP794867 x 1
  • Please Note: Specifications subject to change without notice.

 

Hustler Fastrak 48" Cut HU941724EX

We designed the FasTrak with the homeowner in mind; The zero-radius SmoothTrak steering is easy to use and will edge your flower bed with the finesse of a gardener. Its power makes quick work of the most expansive lawns. The frame is forged of heavy-duty steel. Once you drive a FasTrak, mowing will never be the same. But for the professional, Hustler FasTrak has all the strength, durability and power needed for commercial use. As proof, we offer a remarkable 4-year limited residential warranty plus limited lifetime warranties on the frame and leading edge of the deck. That's a serious mower.

 

Features

ROPS supplied with unit 48" cut side-discharge deck with mulch kit option

Commercial grade welded steel deck

Extra leading edge deck reinforcement

Comfortable foot-operated deck-lift system 1.5" to 4.5" (3.81 cm to 11.4 cm)

Fabricated one piece chassis

Toughest frame, front forks, and deck in the industry

Kawasaki V Twin FR691V engine

SmoothTrak steering - with patented automatic park brake system

18.92 L (5.0 US gal) fuel capacity

Twin Hydro Gear ZT3100 integrated serviceable commercial duty hydro's

Commercial duty sealed deck spindles

Simplest maintenance in the industry

22" Drive and 13" caster tyres

0-12.9 kph (0-8 mph) to get the job done fast

Standard hour meter

Fuel gauge

Mid-Back suspension seat

Flip-up seat pan

Removable floor pan

 

Specifications

  • Engine: Kawasaki FR691V
  • HP: 23.0 hp (17.2kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.2 U.S. qt. (2.1 litre) w/filter
  • Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Fuel Capacity: 19.92 L (5.0 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Cartridge air filter
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • PTO Clutch: Electric PTO Clutch
  • Drive System: Dual hydrostatic. Commercial-duty Hydro-Gear ZT3100
  • Hydrostatic Drive: V-belt drive from engine crankshaft
  • Ground Speed - Forward: Infinitely variable 0-12.9 kph (0 - 8 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius .Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres: 13 x 5.0 - 6, smooth tread
  • Tyres - Drive: 22 x 9.5 - 10, turf tread
  • Weight: 378 kg (835 lbs)
  • Seat: Mid-Back suspension seat
  • Construction: Mainframe is 1.5" x 3" x .125" (38 mm x 76 mm x 3.17 mm) rectangular steel tubing.
  • Front caster wheels mounted with heavy duty greaseable ball bearings on each wheel. Front caster forks are 3/8" (9.52 mm) steel.
  • ROPS: Standard
  • Seat Suspension: Seat-pan suspension springs are standard.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated
  • parking brakes
  • Cup Holder: Two cup holders moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 44.3" (1125.2 mm)
  • Overall Length: 73.6" (1869.4 mm)
  • Width: 49.1" (1247 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 47" (1193.8 mm)
  • Deck System: Side-Discharge: 48" cut. Free-floating deck using three blades with centre blade to the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 48" cut Side Discharge
  • Deck Lift: Foot-operated deck height adjustment.
  • Deck Construction: 10 ga, .135" (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) doubler welded onto
  • spindle mount areas. 11ga. Front bullnose on deck impact areas on trim edges.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.4 cm, .6 cm increments)
  • Blade(s): (3) Heavy-duty, heat treated, blades. 16.50" x 2.50" x .20"
  • Blade Tip Speed: 18,600 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to three spindles. Spring tension idler for extended belt life.
  • Spindles: Aluminium casting with 1.0" (25.4 mm) steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 48": HA121474 - [Includes wavy mulcher blades]. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48"/ 54" / 60": HA933655 - 2 bag catcher [*must order (1) adapter kit below to complete HA933655]. Catcher Adapter Kit 48": HA121074 - 2 bag catcher adapter. Flex Forks 48": HA600213 [2 forks] Light Kit (2015 FasTrak) 48" / 54" / 60": HA121482 - Work later with our optional light kit. Steering Lever Extension Kit: HA333724 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Seat Isolator Kit: HA122166 Replacement Blades:- Low Lift: HP601123 Low Lift (Fusion): HP601014 High Lift: HP606252 (Production) High Lift (Fusion): HP795757 Wavy Mulch: HP796623 Gator: HP796631
  • Please Note: Specifications subject to change without notice.

Hustler Fastrak 54" Cut HU942078EX

We designed the FasTrak with the homeowner in mind; The zero-radius SmoothTrak steering is easy to use and will edge your flower bed with the finesse of a gardener. Its power makes quick work of the most expansive lawns. The frame is forged of heavy-duty steel. Once you drive a FasTrak, mowing will never be the same. But for the professional, Hustler FasTrak has all the strength, durability and power needed for commercial use. As proof, we offer a remarkable 4-year limited residential warranty plus limited lifetime warranties on the frame and leading edge of the deck. That's a serious mower.

Features

ROPS supplied with unit 54" cut side-discharge deck with mulch kit option

Commercial grade welded steel deck

Extra leading edge deck reinforcement

Comfortable foot-operated deck-lift system 1.5" to 4.5" (3.81 cm to 11.4 cm)

Fabricated one piece chassis

Toughest frame, front forks, and deck in the industry

Kawasaki V Twin FR691V engine

SmoothTrak steering - with patented automatic park brake system

18.92 L (5.0 US gal) fuel capacity

Twin Hydro Gear ZT3100 integrated serviceable commercial duty hydro's

Commercial duty sealed deck spindles

Simplest maintenance in the industry

22" Drive and 13" caster tyres

0-12.9 kph (0-8 mph) to get the job done fast

Standard hour meter

Fuel gauge

Mid-Back suspension seat

Flip-up seat pan

Removable floor pan

Specifications

  • Engine: Kawasaki FR691V
  • HP: 23.0 hp (17.2kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
  • Standards.)
  • Type: Forced air cooled, 90-degree V-twin, OHV vertical shaft normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.2 U.S. qt. (2.1 litre) w/filter
  • Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Fuel Capacity: 18.92 L (5.0 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Cartridge air filter
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Commercial-duty Hydro-Gear ZT3100
  • Hydrostatic Drive: V-belt drive from engine crankshaft
  • Ground Speed - Forward: Infinitely variable 0-12.9 kph (0 - 8 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius .Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres: 13 x 6.5 - 6, smooth tread
  • Tyres - Drive: 22 x 11 - 10, turf tread
  • Weight: 390 kg (860 lbs)
  • Seat: Mid-Back suspension seat
  • Construction: Mainframe is 1.5" x 3.0" x .125" (38 mm x 76 mm x 3.17 mm) rectangular steel tubing. Front caster wheels mounted with roller bearings on each wheel. Front caster forks are .375" (9.5 mm) steel.
  • ROPS: Standard
  • Seat Suspension: Seat-pan suspension springs are standard.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Two cup holders moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 44.3" (1125.2 mm)
  • Overall Length: 73.6" (1869.4 mm)
  • Width: 55.1" (1399.5 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 52" (1320.8 mm)
  • Deck System: Side-Discharge: 54" cut. Free-floating deck using three blades with centre blade to the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 54" cut Side Discharge
  • Deck Lift: Foot-operated deck height adjustment.
  • Deck Construction: 10 ga, .135" (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) doubler welded onto spindle mount areas. 11ga. Front bullnose on deck impact areas on trim edges
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.4 cm, .6 cm increments)
  • Blade(s): (3) Heavy-duty, heat treated, steel blades. 18.50" x 2.50" x .20"
  • Blade Tip Speed: 18,910 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to three spindles. Spring tension idler for extended belt life.
  • Spindles: Aluminium casting with 1.0" (25.4 mm) steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 54": HA121475 - [Includes wavy mulcher blades]. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48"/ 54" / 60": HA933655 - 2 bag catcher [*must order (1) adapter kit below to complete HA933655]. Catcher Adapter Kit 54": HA121075 - 2 bag catcher adapter. Flex Forks 54" / 60": HA605123 [2 forks] Light Kit (2015 FasTrak) 48" / 54" / 60": HA121482 - Work later with our optional light kit. Steering Lever Extension Kit: HA333724 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Seat Isolator Kit: HA122166 Replacement Blades:- Low Lift: HP601124 Low Lift (Fusion): HP601012 High Lift: HP606251 (Production) High Lift (Fusion): HP797696 Wavy Mulch: HP797704 Gator: HP797712
  • Please Note: Specifications subject to change without notice.

Hustler Fastrak 60" HU941740EX

We designed the FasTrak with the homeowner in mind; The zero-radius SmoothTrak steering is easy to use and will edge your flower bed with the finesse of a gardener. Its power makes quick work of the most expansive lawns. The frame is forged of heavy-duty steel. Once you drive a FasTrak, mowing will never be the same. But for the professional, Hustler FasTrak has all the strength, durability and power needed for commercial use. As proof, we offer a remarkable 4-year limited residential warranty plus limited lifetime warranties on the frame and leading edge of the deck. That's a serious mower.

 

Features

ROPS supplied with unit 54" cut side-discharge deck with mulch kit option

Commercial grade welded steel deck

Extra leading edge deck reinforcement

Comfortable foot-operated deck-lift system 1.5" to 4.5" (3.81 cm to 11.4 cm)

Fabricated one piece chassis

Toughest frame, front forks, and deck in the industry

Kawasaki V Twin FR730V engine

SmoothTrak steering - with patented automatic park brake system

18.92 L (5.0 US gal) fuel capacity

Twin Hydro Gear ZT3100 integrated serviceable commercial duty hydro's

Commercial duty sealed deck spindles

Simplest maintenance in the industry

22" Drive and 13" caster tyres

0-12.9 kph (0-8 mph) to get the job done fast

Standard hour meter

Fuel gauge

Mid-Back suspension seat

Flip-up seat pan

Removable floor pan

Specifications

  • Engine: Kawasaki FR730V
  • HP: 24.0 hp (17.9kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Type: Forced air cooled, 90 degree V-twin, OHV vertical shaft normally aspirated petrol engine.
  • Starter: 12-volt (see engine manufacturers specifications)
  • Ignition: Electronic
  • Charging System: 12-volt (see engine manufacturers specifications for current rating)
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.2 U.S. qt. (2.1 litre) w/filter
  • Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Fuel Capacity: 18.92 L (5.0 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Cartridge air filter
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • Drive System: Dual hydrostatic. Commercial-duty Hydro-Gear ZT3100
  • Hydrostatic Drive: V-belt drive from engine crankshaft
  • Ground Speed - Forward: Infinitely variable 0-12.9 kph (0 - 8 mph)
  • Ground Speed - Reverse: 0-8 kph (0-5 mph)
  • Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius .Turns within its own length. Counter-rotating, independent drive wheels
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres: 13 x 6.5 - 6, smooth tread
  • Tyres - Drive: 22 x 11 - 10, turf tread
  • Weight: 401 kg (885 lbs)
  • Seat: Mid-Back suspension seat
  • Construction: Mainframe is 1.5" x 3.0" x .125" (38 mm x 76 mm x 3.17 mm) rectangular steel tubing. Front caster wheels mounted with roller bearings on each wheel. Front caster forks are .375" (9.5 mm) steel.
  • ROPS: Standard
  • Seat Suspension: Seat-pan suspension springs are standard.
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Cup Holder: Two cup holders moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Height: 44.3" (1125.2 mm)
  • Overall Length: 73.6" (1869.4 mm)
  • Width: 61.1" (1551.94 mm) w/discharge chute up.
  • Width (tyre-to-tyre): 52" (1320.8 mm)
  • Deck System: Side-Discharge: 60" cut. Free-floating deck using three blades with centre blade to the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 60" cut Side Discharge
  • Deck Lift: Foot-operated deck height adjustment.
  • Deck Construction: 10 ga, .135" (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) double welded onto spindle mount areas. 11ga. Front bullnose on deck impact areas on trim edges
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport
  • position. Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.4 cm, .6 cm increments)
  • Blade(s): (3) Heavy-duty, heat treated, steel blades. 20.50" x 2.50" x .20"
  • Blade Tip Speed: 18,410 fpm
  • Blade Drive: Single V-belt drive from engine with electric clutch to three spindles. Spring tension idler for extended belt life.
  • Spindles: Aluminium casting with 1.0" (25.4 mm) steel shafts and sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional accessories available for purchase separately include: Mulch Kit 60": HA121476 - [Includes wavy mulcher blades]. The versatile Hustler mowing decks can side -discharge or mulch. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 48"/ 54" / 60": HA933655 - 2 bag catcher [*must order (1) adapter kit below to complete HA933655]. Catcher Adapter Kit 60": HA121076 - 2 bag catcher adapter. Flex Forks 54" / 60": HA605123 [2 forks] Light Kit (2015 FasTrak) 48" / 54" / 60": HA121482 - Work later with our optional light kit. Steering Lever Extension Kit: HA333724 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Seat Isolator Kit: HA122166 Replacement Blades:- Low Lift: HP793794 Low Lift (Fusion): HP600901 High Lift: HP606253 (Production) High Lift (Fusion): HP794685 Wavy Mulch: HP794214 Gator: HP794230
  • Please Note: Specifications subject to change without notice.

 

Hustler Super S 36" Cut HU940288EX

The HUSTLER SUPER S, STAND-ON - The compact choice for professionals; The SUPER S is a commercial STAND-ON zero-turn lawn mower which features superior operator comfort and positioning, operator-friendly controls and a compact stance that makes navigating tight spaces easy. From the industry leading premium and commercial grade Kawasaki V-Twin engine to the quality appointments which include a Hydro-Gear pump, Parker wheel motors and SMOOTHTRAK steering, the HUSTLER SUPER S is the perfect choice for highly landscaped properties or any landscape where maneuverability is a top priority. Its smaller footprint also allows for more mowers to fit on a trailer and more space for storage. Need to get through a gate for some jobs? This is the machine for you, at only 39" (990.6 mm) wide with the chute up, the problem of hard to access areas dissappears. At up to 10.46 kph ground speed, with a huge 24.6 litre fuel capacity, and covering an impressive 2.33 acres per hour (with the 36" cut deck fitted) you’ll have the lawns finished in no time.

Features

Kawasaki FX600V premium and commercial grade V- twin engine.

Heavy-duty canister air filer

Operator comfort - features exceptional operator positioning for all-day comfort.

Operator-friendly, ergonomic controls

Compact stance - perfect for tight spaces and for trailering from job-to-job.

Shock-absorbed operator platform which reponds to drivers weight.

Service friendly design - designed to make maintenance and service simple and easy.

Heavy-duty fabricated steel deck - more durable.

Ductile cast iron cutting spindles with 1" steel shaft and double lip sealed ball bearings

Heavy-duty fabricated frame - unmatched durability.

SMOOTHTRAK steering - responsive, precise steering control.

Dual hydrostatic - Hydro-Gear 10cc pump with Parker TL0195 wheel motors.

Hand-operated parking brakes.

Heavy-duty fabricated 3/8" steel front caster forks with commerical tapered

greaseable wheel bearings with debris cap

20" Drive tyres

11" Front caster tyres

24.6 Litres fuel capacity

10.46 kph (6.5 mph)

Productivity 2.33 acres per hour

 

Specifications

  • Engine: Kawasaki FX600V
  • HP: 19 hp (14.2 kW) at 3,600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards).
  • Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
  • Starter: 12 volt, heavy-duty shift-type starter.
  • Ignition: Electronic spark ignition.
  • Charging System: 12-volt (see engine manufacturers specifications).
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 1.7 litres with filter.
  • Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Fuel Capacity: 24.6 Litres
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy duty canister
  • Cooling: Air cooled. Fly-wheel fan
  • Governor: Mechanical
  • PTO Clutch: Warner electric PTO clutch
  • Drive System: Hydro-Gear 10cc pumps with Parker TL0195 wheel motors.
  • Hydrostatic Drive: Dual hydrostatic
  • Pumps: Hydro-Gear 10cc pump
  • Pump Drive: Belt driven
  • Drive Cooling: Yes, Pump mounted fans
  • Drive Filter: Yes
  • Final Drive: Hydro-Gear 10cc pumps with Parker TL0195 wheel motors.
  • Ground Speed - Forward: 10.46 kph
  • Steering: SMOOTHTRAK twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels.
  • Brakes: Hand-operated with patented automatic park brake.
  • Caster Tyres: 11 x 4 - 5 semi-pneumatic, smooth tread.
  • Drive Tyres: 20 x 8.5-10 turf tread.
  • Weight: 395.1 kg
  • Construction: Mainframe is 1.5" x 2" x .188 ” (38.1 mm x 50.8 mm x 4.77 mm) tubular steel. Operator Platform is 7 ga, .180" (4.6 mm) with embossed tread pattern
  • Headlight: Optional accessory
  • Grass Catcher: Optional accessory
  • Kit - Light: Optional accessory
  • Kit - Mulch: Optional accessory
  • ROPS: No
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Hand lever operated hand brake.
  • Height: 47.83" (1214.9 mm)
  • Overall Length: 63.5" (1612.9 mm)
  • Width: 39" [with chute up] (990.6 mm)
  • Width (tyre-to-tyre): 36.3" (922.02 mm)
  • Deck System: Side-Discharge: 36" cut. (2) Blades , deck is suspended at two points at the rear
  • and two in front. Includes front deck-mounted anti scalp roller to improve flotation in rolling and uneven terrain.
  • Cutting Widths: 36" Cut Side Discharge
  • Deck Lift: Hand-operated deck height adjustment.
  • Deck Construction: Fabricated 7 Gauge with reinforced 11 gauge spindle mounts , 11 Gauge formed bumper bar and 1.5"x 375" steel bar on trim side.
  • Cutting Height(s): Hand-operated deck height adjustment. Height is adjustable in 1/4" increments from 1.5" to 5.5" (38.1 mm to 139.7 mm, 6.35 mm increments).
  • Blade(s): (2) Heavy-duty blades 17.86” x 2.50” x .20”
  • Blade Drive: V-belt drive to spindles with electric clutch. Spring tension idler pulleys for extended belt life.
  • Spindles: Ductile cast iron with 1" steel shaft with double lip sealed ball bearings.
  • Discharge Chute: High density, rubberised.
  • Optional Accessories: Optional accessories available for purchase separately include:
  • HA606045 Side steel catcher (no adapter needed). HA122547 Kit, mulch 36" blades included. HA122748 Kit, light. HA122821 Kit, cup holder. HA122777 Kit, trash receptacle.
  • Please Note: Specifications subject to change without notice.

Hustler DashXD 34" Cut HU940742EX

The NEW Dash XD, what other choice is there?!

The NEW Dash XD, perfectly designed for the small acreage owner with features that you will only find on expensive commercial grade machines. Hustler has taken it's capabilities in the big lawn space and delivered it in a compact machine that means the small acreage owner no longer needs to compromise on quality and ability.

 

Features

  • 1” x 2” Fully Tubular frame, making it one of the toughest in its class
  • Foot operated deck lift system, not hand operated like other brands
  • Premium bolstered seat with lumbar support built in
  • Easy Fill Fuel System
  • Compact size that will fit through most gates, giving easy access to the entire yard
  • Hustler exclusive 18” BigBite drive tires and 11" front castors
  • Premium Kawasaki V-Twin engine
  • Smooth Trak steering with automatic park brake system
  • 4.1” Deep Deck with larger discharge to increase grass cutting capacity and clearing performance
  • Engine Guard Standard

Specifications

  • Domestic Warranty

    2 Year - 200 Hour
  • Engine (cc)

    603 cc
  • Engine

    Kawasaki FR541V
  • Horsepower

    15 hp @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    7.6L
  • Blade Length

    42.5cm x 2 Blades
  • Dry Weight

    207kg
  • Fuel

    Unleaded (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Hydro-Gear ZT1800 integrated hydrostatic zero-turn transaxles
  • Ground Speed - Forward

    Infinitely variable 0-9.7 km/h
  • Ground Speed - Reverse

    0-4.8 km/h
  • Brakes

    Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
  • Caster Tyres

    11 x 4, smooth tread
  • Tyres - Drive

    Exclusive 18 x 6 - 8 BigBite tyre
  • Seat

    Premium bolstered seat with built-in lumbar support
  • Hour Meter

    Standard
  • ROPS

    **No ROPS**
  • Seat Suspension

    Seat suspension springs are standard
  • Height

    102cm
  • Width

    95cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    89cm
  • Deck System

    Side-Discharge: 34" cut. 2 Blades, deck is suspended at two points at the rear and two in front.
  • Cutting Widths

    34" (86cm)
  • Deck Lift

    Foot Operated 4 point deck lift system
  • Deck Construction

    11 ga, 3.0 mm welded steel with 14 ga, support plate double welded onto spindle mount areas. Solid 9.5 mm x 25.4 mm steel bars reinforce impact areas on trim edges. Steel deck housing is 104 mm deep to provide room for high-capacity mowing.
  • Cutting Height(s)

    1.5" (3.8cm) to 4.5" (11.5cm) in 1/2" (12mm) increments
  • Blade(s)

    2 x Heavy-duty, heat treated blades 16.5"
  • Blade Tip Speed

    17500fpm
  • Discharge Chute

    High density, rubberised
  • Transmission

    Hydro-Gear ZT1800
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    166 cm
  • All specifications are subject to change without notice.

 

 

Hustler Dash XD 42" Cut HU940759EX

The NEW Dash XD, what other choice is there?!

The NEW Dash XD, perfectly designed for the small acreage owner with features that you will only find on expensive commercial grade machines. Hustler has taken it's capabilities in the big lawn space and delivered it in a compact machine that means the small acreage owner no longer needs to compromise on quality and ability.

 

Features

  • 1” x 2” Fully Tubular frame, making it one of the toughest in its class
  • foot operated deck lift system, not hand operated like other brands
  • Premium bolstered seat with lumbar support built in
  • Easy Fill Fuel System
  • Compact size that will fit through most gates, giving easy access to the entire yard
  • Hustler exclusive 18” BigBite drive tires and 11" front castors
  • Premium Kawasaki V-Twin engine
  • Smooth Trak steering with automatic park brake system
  • 4.1” Deep Deck with larger discharge to increase grass cutting capacity and clearing performance
  • Engine Guard Standard

 

Specifications

  • Domestic Warranty

    2 Year - 200 Hour
  • Engine (cc)

    603 cc
  • Engine

    Kawasaki FR541V
  • Horsepower

    15 hp @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    7.6L
  • Blade Length

    52cm x 2 Blades
  • Dry Weight

    212kg
  • Fuel

    Unleaded (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Hydro-Gear ZT1800 integrated hydrostatic zero-turn transaxles
  • Ground Speed - Forward

    Infinitely variable 0-9.7 km/h
  • Ground Speed - Reverse

    0-4.8 km/h
  • Brakes

    Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
  • Caster Tyres

    11 x 4, smooth tread
  • Tyres - Drive

    Exclusive 18 x 8.5 - 8 BigBite tyre
  • Seat

    Premium bolstered seat with built-in lumbar support
  • Hour Meter

    Standard
  • ROPS

    **No ROPS**
  • Seat Suspension

    Seat suspension springs are standard
  • Height

    102cm
  • Width

    110cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    104cm
  • Deck System

    Side-Discharge: 42" cut. 2 Blades, deck is suspended at two points at the rear and two in front.
  • Cutting Widths

    42" (107cm)
  • Deck Lift

    Foot Operated 4 point deck lift system
  • Deck Construction

    11 ga, 3.0 mm welded steel with 14 ga, support plate double welded onto spindle mount areas. Solid 9.5 mm x 25.4 mm steel bars reinforce impact areas on trim edges. Steel deck housing is 104 mm deep to provide room for high-capacity mowing.
  • Cutting Height(s)

    1.5" (3.8cm) to 4.5" (11.5cm) in 1/2" (12mm) increments
  • Blade(s)

    2 x Heavy-duty, heat treated blades 20.5"
  • Blade Tip Speed

    17800 fpm
  • Discharge Chute

    High density, rubberised
  • Transmission

    Hydro-Gear ZT1800
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    166 cm
  • All specifications are subject to change without notice.

 

Hustler Raptor X 42" Cut HU940494EX

The all new Raptor series from Hustler, changing the game in zero turn lawnmowers… again!

Introducing the all new Raptor series from Hustler. Completely redesigned from the ground up, with a new wider stance and solid one piece 11 gauge steel frame. Exclusive Big Bite rear tyres and premium Kawasaki v-twin power. Plus a host of other features we just dont have room to mention!

Features

  • New Wide Frame, 1.5” x 3” Fully Tubular
  • New Deck Lift System with 4-Point Deck Levelling
  • Better Seats, Armrests Standard
  • New Fenders with Easy Fill Fuel System
  • Removable Floor Pan – easy access to clean decks, change belts - with Rubberised floor mats
  • Battery - Sealed AGM – spill-proof, maintenance free, Hustler exclusive
  • Premium Kawasaki commercial grade engine
  • Smooth Trak steering with automatic park brake system
  • Hustler exclusive 18” BigBite drive tires and 11" front castors
  • New 4.5” Deep Deck with larger discharge to increase grass cutting capacity and clearing performance

 

Specifications

  • Domestic Warranty

    3 Year - 300 Hour
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR651V
  • Horsepower

    21.5 hp (16.0kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.36L
  • Blade Length

    52cm x 2 Blades
  • Dry Weight

    244kg
  • Fuel

    Unleaded (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Hydro-Gear ZT2200 integrated hydrostatic zero-turn transaxles
  • Ground Speed - Forward

    Infinitely variable 0-11.2 km/h
  • Ground Speed - Reverse

    0-6.1 km/h
  • Brakes

    Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
  • Caster Tyres

    11 x 5, smooth tread
  • Tyres - Drive

    Exclusive 18 x 8.5 - 8 BigBite tyre
  • Seat

    Premium bolstered mid-back seat with armrests and built-in lumbar support
  • Hour Meter

    Standard
  • ROPS

    **No ROPS**
  • Seat Suspension

    Seat suspension springs are standard
  • Height

    104cm
  • Width

    116cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    109cm
  • Deck System

    Side-Discharge: 42" cut. 2 Blades, deck is suspended at two points at the rear and two in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    42" (107cm)
  • Deck Lift

    Foot Operated 4 point deck lift system
  • Deck Construction

    11 ga, 3.0 mm welded steel with 7 ga, 4.5 mm support plate double welded onto spindle mount areas. Solid 9.5 mm x 25.4 mm steel bars reinforce impact areas on trim edges. Steel deck housing is 114.3 mm deep to provide room for high-capacity mowing.
  • Cutting Height(s)

    1.5" (3.8cm) to 4.5" (11.5cm) in 1/4" (6mm) increments
  • Blade(s)

    2 x Heavy-duty, heat treated blades. 20.5" X 2.50 X .20"
  • Blade Tip Speed

    18,000 fpm
  • Discharge Chute

    High density, rubberised
  • Transmission

    Hydro-Gear ZT2200
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    175cm

 

Hustler Raptor X 54" Cut HU940502EX

The all new Raptor series from Hustler, changing the game in zero turn lawnmowers… again!

Introducing the all new Raptor series from Hustler. Completely redesigned from the ground up, with a new wider stance and solid one piece 11 gauge steel frame. Exclusive Big Bite rear tyres and premium Kawasaki v-twin power. Plus a host of other features we just dont have room to mention!

Features

 

  • New Wide Frame, 1.5” x 3” Fully Tubular
  • New Deck Lift System with 4-Point Deck Levelling
  • Bolstered Mid Back Seat w' Armrests Standard
  • New Fenders with Easy Fill Fuel System
  • Removable Floor Pan – easy access to clean decks, change belts - with Rubberised floor mats
  • Battery - Sealed AGM – spill-proof, maintenance free, Hustler exclusive
  • Premium Kawasaki commercial grade engine
  • Smooth Trak steering with automatic park brake system
  • Hustler exclusive 18” BigBite drive tires and 11" front castors
  • New 4.5” Deep Deck with larger discharge to increase grass cutting capacity and clearing performance

Specifications

 

  • Domestic Warranty

    3 Year - 300 Hour
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR691V
  • Horsepower

    23.0 hp (17.2kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.36L
  • Blade Length

    47cm x 3 Blades
  • Dry Weight

    256kg
  • Fuel

    Unleaded (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Hydro-Gear ZT2200 integrated hydrostatic zero-turn transaxles
  • Ground Speed - Forward

    Infinitely variable 0-11.2 km/h
  • Ground Speed - Reverse

    0-6.1 km/h
  • Brakes

    Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
  • Caster Tyres

    11 x 6, smooth tread
  • Tyres - Drive

    Exclusive 18 x 10.5 - 8 BigBite tyre
  • Seat

    Premium bolstered mid-back seat with armrests and built-in lumbar support
  • Hour Meter

    Standard
  • ROPS

    **No ROPS**
  • Seat Suspension

    Seat suspension springs are standard
  • Height

    104cm
  • Width

    149cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    118cm
  • Deck System

    Side-Discharge: 54" cut. 3 Blades, deck is suspended at two points at the rear and two in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    54" (137cm)
  • Deck Lift

    Foot Operated 4 point deck lift system
  • Deck Construction

    11 ga, 3.0 mm welded steel with 7 ga, 4.5 mm support plate double welded onto spindle mount areas. Solid 9.5 mm x 25.4 mm steel bars reinforce impact areas on trim edges. Steel deck housing is 114.3 mm deep to provide room for high-capacity mowing.
  • Cutting Height(s)

    1.5" (3.8cm) to 4.5" (11.5cm) in 1/4" (6mm) increments
  • Blade(s)

    3 x Heavy-duty, heat treated blades. 18.5" X 2.50 X .20"
  • Blade Tip Speed

    18,600 fpm
  • Discharge Chute

    High density, rubberised
  • Transmission

    Hydro-Gear ZT2200
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    175cm

 

 

Hustler Raptor XD 42" Cut HU939819EX

The New Raptor® XD is a low profile, heavy-duty premium residential zero-turn mower. With an all new wider stance and single fully welded frame, this machine is built like a tank, but drives like a sports car. Featuring all the exclusives that you can only find on a Hustler machine, the Raptor® XD is a hard act to beat!

Features

  • Fully fabricated steel deck
  • Hustler exclusive 20” BigBite drive tyres and 13" front castors
  • Premium Hydro-Gear 2800 transmission for reliable and dependable operation
  • One piece welded tubular frame, not bolt together like inferior machines
  • Smooth Trak steering with automatic park brake system
  • Premium bolstered high-back seat with armrests and built-in lumbar support
  • Fast, professional zero turn productivity
  • Premium Kawasaki commercial grade engine

Specifications

  • Domestic Warranty

    3 Year - 300 Hour Domestic
  • Commercial Warranty

    3 Year - 300 Hour Commercial
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR651V
  • Horsepower

    21.5 hp (16.0kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.36 L
  • Blade Length

    52cm x 2 Blades
  • Dry Weight

    279kg
  • Fuel

    Unleaded (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Hydro-Gear ZT2800 integrated hydrostatic zero-turn transaxles
  • Ground Speed - Forward

    Infinitely variable 0-12.1km/h
  • Ground Speed - Reverse

    0-6.4 km/h
  • Brakes

    Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
  • Caster Tyres

    13 x 5, smooth tread
  • Tyres - Drive

    Exclusive 20 x 8 - 10 BigBite tyre
  • Seat

    Premium bolstered high-back seat with armrests and built-in lumbar support
  • Hour Meter

    Standard
  • ROPS

    **No ROPS**
  • Seat Suspension

    Seat suspension springs are standard
  • Height

    111cm
  • Width

    116cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    107cm
  • Deck System

    Side-Discharge: 42" cut. 2 Blades, deck is suspended at two points at the rear and two in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    42" (107cm)
  • Deck Lift

    Foot Operated 4 point deck lift system
  • Deck Construction

    11 ga, 3.0 mm welded steel with 7 ga, 4.5 mm support plate double welded onto spindle mount areas. Solid 9.5 mm x 25.4 mm steel bars reinforce impact areas on trim edges. Steel deck housing is 114.3 mm deep to provide room for high-capacity mowing.
  • Cutting Height(s)

    1.5" (3.8cm) to 4.5" (11.5cm) in 1/4" (6mm) increments
  • Blade(s)

    (2) Heavy-duty, heat treated blades. 20.5" X 2.50 X .20"
  • Blade Tip Speed

    18,400 fpm
  • Discharge Chute

    High density, rubberised
  • Transmission

    Hydro-Gear ZT2800
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    176cm
  • All specifications are subject to change without notice.

 

 

Hustler Raptor XD 48" Cut HU940510EX

The New Raptor® XD is a low profile, heavy-duty premium residential zero-turn mower; With an all new wider stance and single fully welded frame, this machine is built like a tank, but drives like a sports car. Featuring all the exclusives that you can only find on a Hustler machine, the Raptor® XD is a hard act to beat!

 

Features

  • Fully fabricated steel deck
  • Hustler exclusive 20” BigBite drive tires and 13" front castors
  • Premium Hydro-Gear 2800 transmission for reliable and dependable operation
  • One piece welded tubular frame, not bolt together like inferior machines
  • Smooth Trak steering with automatic park brake system
  • Premium bolstered high-back seat with armrests and built-in lumbar support
  • Fast, professional zero turn productivity
  • Premium Kawasaki commercial grade engine

 

Specifications

  • Domestic Warranty

    3 Year - 300 Hour Domestic
  • Commercial Warranty

    3 Year - 300 Hour Commercial
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR691V
  • Horsepower

    23 hp (16.0kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.36 L
  • Blade Length

    42cm x 3 Blades
  • Dry Weight

    284kg
  • Fuel

    Unleaded (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Hydro-Gear ZT2800 integrated hydrostatic zero-turn transaxles
  • Ground Speed - Forward

    Infinitely variable 0-12.1km/h
  • Ground Speed - Reverse

    0-6.4 km/h
  • Brakes

    Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
  • Caster Tyres

    13 x 6.5 , smooth tread
  • Tyres - Drive

    Exclusive 20 x 8 - 10 BigBite tyre
  • Seat

    Premium bolstered high-back seat with armrests and built-in lumbar support
  • Hour Meter

    Standard
  • ROPS

    **No ROPS**
  • Seat Suspension

    Seat suspension springs are standard
  • Height

    111cm
  • Width

    133cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    107cm
  • Deck System

    Side-Discharge: 48" cut. 3 Blades, deck is suspended at two points at the rear and two in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    48" (122cm)
  • Deck Lift

    Foot Operated 4 point deck lift system
  • Deck Construction

    11 ga, 3.0 mm welded steel with 7 ga, 4.5 mm support plate double welded onto spindle mount areas. Solid 9.5 mm x 25.4 mm steel bars reinforce impact areas on trim edges. Steel deck housing is 114.3 mm deep to provide room for high-capacity mowing.
  • Cutting Height(s)

    1.5" (3.8cm) to 4.5" (11.5cm) in 1/4" (6mm) increments
  • Blade(s)

    3 x Heavy-duty, heat treated blades. 20.5" X 2.50 X .20"
  • Blade Tip Speed

    18,500 fpm
  • Discharge Chute

    High density, rubberised
  • Transmission

    Hydro-Gear ZT2800
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    176cm
  • All specifications are subject to change without notice.

 

Hustler Raptor XD 54" Cut HU939751EX

The New Raptor® XD is a low profile, heavy-duty premium residential zero-turn mower. With an all new wider stance and single fully welded frame, this machine is built like a tank, but drives like a sports car. Featuring all the exclusives that you can only find on a Hustler machine, the Raptor® XD is a hard act to beat!

 

Features

  • Fully fabricated steel deck
  • Hustler exclusive 20” BigBite drive tires and 13" front castors
  • Premium Hydro-Gear 2800 transmission for reliable and dependable operation
  • One piece welded tubular frame, not bolt together like inferior machines
  • Smooth Trak steering with automatic park brake system
  • Premium bolstered high-back seat with armrests and built-in lumbar support
  • Fast, professional zero turn productivity
  • Premium Kawasaki commercial grade engine

 

Specifications

 

  • Domestic Warranty

    3 Year - 300 Hour Domestic
  • Commercial Warranty

    3 Year - 300 Hour Commercia
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR691V
  • Horsepower

    23.0 hp (17.2kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.36 L
  • Blade Length

    47cm x 3 Blades
  • Dry Weight

    296kg
  • Fuel

    Unleaded (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Hydro-Gear ZT2800 integrated hydrostatic zero-turn transaxles
  • Ground Speed - Forward

    Infinitely variable 0-12.1km/h
  • Ground Speed - Reverse

    0-6.4 km/h
  • Brakes

    Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
  • Caster Tyres

    13 x 6.5 , smooth tread
  • Tyres - Drive

    Exclusive 20 x 12 - 12 BigBite tyre
  • Seat

    Premium bolstered high-back seat with armrests and built-in lumbar support
  • Hour Meter

    Standard
  • ROPS

    **No ROPS**
  • Seat Suspension

    Seat suspension springs are standard
  • Height

    111cm
  • Width

    149cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    123cm
  • Deck System

    Side-Discharge: 54" cut. 3 Blades, deck is suspended at two points at the rear and two in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    54" (137cm)
  • Deck Lift

    Foot Operated 4 point deck lift system
  • Deck Construction

    11 ga, 3.0 mm welded steel with 7 ga, 4.5 mm support plate double welded onto spindle mount areas. Solid 9.5 mm x 25.4 mm steel bars reinforce impact areas on trim edges. Steel deck housing is 114.3 mm deep to provide room for high-capacity mowing.
  • Cutting Height(s)

    1.5" (3.8cm) to 4.5" (11.5cm) in 1/4" (6mm) increments
  • Blade(s)

    3 x Heavy-duty, heat treated blades. 18.5" X 2.50 X .20"
  • Blade Tip Speed

    18,800fpm
  • Discharge Chute

    High density, rubberised
  • Transmission

    Hydro-Gear ZT2800
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    181cm
  • All specifications are subject to change without notice.

Hustler Raptor XDX 48" Cut HU941492EX

As comfortable being used by the astute acreage owner or the lawn mowing contractor, the Raptor XDX is the perfect entry level professional machine at a home user price; The NEW Raptor XDX combines the best features of the commercial grade Fastrak into the body of a Raptor, giving you the best of both worlds at a price that won't break the bank. With a deep 5" cutting deck, commercial grade spindles, and big commercial Hydrogear 3100 hydrostatic drives, this machine is just as much at home on the trailer of the landscape contractor as it is in the astute home owners garage.

 

Features

  • Commercial grade 10ga. welded steel deck w' leading edge deck reinforcement w' Commercial duty sealed deck spindles.
  • Fabricated one piece chassis. Not bolt together! Toughest frame, front forks, and deck in class.
  • Reliable industry leading Kawasaki FR Series V-Twin FR691V engine.
  • SmoothTrak steering with a patented automatic park brake system.
  • Premium Twin Hydro Gear ZT3100 integrated serviceable commercial duty hydro's.
  • Superior Bolstered extra High-Back seat with armrests and built in lumbar support.
  • Hustler Exclusive 22" BigBite drive tyres and 13" caster tyres.
  • 12.5 km p/h forward ground speed.
  • Beautiful quality of cut. Your lawn will be the envy of the neighbourhood.
  • Flip up floor pan and removeable seat pan plus Tool-less removable pulley covers for easy maintenance.

Specifications

  • Domestic Warranty

    3 Year or 400 hour Domestic Warranty
  • Commercial Warranty

    3 Year or 400 hour Commercial Warranty
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR691V
  • Horsepower

    23.0hp (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.4 L
  • Blade Length

    42cm x 3 Blades
  • Dry Weight

    293 kg
  • Fuel

    Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Commercial-duty Hydro-Gear ZT3100
  • Ground Speed - Forward

    Infinitely variable 0-12.5 km/h
  • Ground Speed - Reverse

    0-8 km/h
  • Brakes

    In Service: Hydrostatic dynamic braking. Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres

    13 x 6.5, smooth tread
  • Tyres - Drive

    Exclusive 22 x 9.5 - 10 BigBite tyre
  • Seat

    Superior Bolstered extra High-Back seat with armrests and built in lumbar support.
  • Hour Meter

    Standard
  • ROPS

    No ROPS
  • Seat Suspension

    Spring suspension
  • Height

    111cm
  • Width

    129cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    116cm
  • Deck System

    Side-Discharge: 48" cut. Free-floating deck using three blades with centre blade to the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    48” (1196 mm) cut side discharge
  • Deck Lift

    Foot-operated deck height adjustment in 6 mm increments from 38.1 mm to 114.3 mm.
  • Deck Construction

    10 ga, .135” (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) doubler welded onto spindle mount areas. Solid 11ga. steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge.
  • Cutting Height(s)

    Magnetic Pin for setting cut height
  • Blade(s)

    (3) Heavy-duty, heat treated, blades. 16.50" x 2.50" x .20"
  • Blade Tip Speed

    18,600 fpm
  • Discharge Chute

    High density, rubberised.
  • Transmission

    Hydro-Gear ZT3100
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    181cm
  • All specifications are subject to change without notice.

 

 

Hustler Raptor XDX 54" Cut HU942060EX

As comfortable being used by the astute acreage owner or the lawn mowing contractor, the Raptor XDX is the perfect entry level professional machine at a home user price; The NEW Raptor XDX combines the best features of the commercial grade Fastrak into the body of a Raptor, giving you the best of both worlds at a price that won't break the bank. With a deep 5" cutting deck, commercial grade spindles, and big commercial Hydrogear 3100 hydrostatic drives, this machine is just as much at home on the trailer of the landscape contractor as it is in the astute home owners garage.

Features

  • Commercial grade 10ga. welded steel deck w' leading edge deck reinforcement w' Commercial duty sealed deck spindles.
  • Fabricated one piece chassis. Not bolt together! Toughest frame, front forks, and deck in class.
  • Reliable industry leading Kawasaki FR Series V-Twin FR691V engine.
  • SmoothTrak steering with a patented automatic park brake system.
  • Premium Twin Hydro Gear ZT3100 integrated serviceable commercial duty hydro's.
  • Superior Bolstered extra High-Back seat with armrests and built in lumbar support.
  • Hustler Exclusive 22" BigBite drive tyres and 13" caster tyres.
  • 12.5 km p/h forward ground speed.
  • Beautiful quality of cut. Your lawn will be the envy of the neighbourhood.
  • Flip up floor pan and removeable seat pan plus Tool-less removable pulley covers for easy maintenance.

Specifications

 

  • Domestic Warranty

    3 Year or 400 hour Domestic Warranty
  • Commercial Warranty

    3 Year or 400 hour Commercial Warranty
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR691V
  • Horsepower

    23.0hp (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.4 L
  • Blade Length

    47cm x 3 Blades
  • Dry Weight

    308 kg
  • Fuel

    Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Commercial-duty Hydro-Gear ZT3100
  • Ground Speed - Forward

    Infinitely variable 0-12.5 km/h
  • Ground Speed - Reverse

    0-8 km/h
  • Brakes

    In Service: Hydrostatic dynamic braking. Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres

    13 x 6.5, smooth tread
  • Tyres - Drive

    Exclusive 22 x 11 - 10 BigBite tyre
  • Seat

    Superior Bolstered extra High-Back seat with armrests and built in lumbar support.
  • Hour Meter

    Standard
  • ROPS

    No ROPS
  • Seat Suspension

    Spring suspension
  • Height

    111cm
  • Width

    145cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    123cm
  • Deck System

    Side-Discharge: 54" cut. Free-floating deck using three blades with centre blade to the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    54” (1371 mm) cut side discharge
  • Deck Lift

    Foot-operated deck height adjustment in 6 mm increments from 38.1 mm to 114.3 mm.
  • Deck Construction

    10 ga, .135” (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) doubler welded onto spindle mount areas. Solid 11ga. steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge.
  • Cutting Height(s)

    Magnetic Pin for setting cut height
  • Blade(s)

    (3) Heavy-duty, heat treated, blades. 16.50" x 2.50" x .20"
  • Blade Tip Speed

    18,900 fpm
  • Discharge Chute

    High density, rubberised.
  • Transmission

    Hydro-Gear ZT3100
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    181cm
  • All specifications are subject to change without notice

 

 

Hustler Raptor XDX 60" Cut HU941518EX

As comfortable being used by the astute acreage owner or the lawn mowing contractor, the Raptor XDX is the perfect entry level professional machine at a home user price; The NEW Raptor XDX combines the best features of the commercial grade Fastrak into the body of a Raptor, giving you the best of both worlds at a price that won't break the bank. With a deep 5" cutting deck, commercial grade spindles, and big commercial Hydrogear 3100 hydrostatic drives, this machine is just as much at home on the trailer of the landscape contractor as it is in the astute home owners garage.

Features

  • Commercial grade 10ga. welded steel deck w' leading edge deck reinforcement w' Commercial duty sealed deck spindles.
  • Fabricated one piece chassis. Not bolt together! Toughest frame, front forks, and deck in class.
  • Reliable industry leading Kawasaki FR Series V-Twin FR730V engine.
  • SmoothTrak steering with a patented automatic park brake system.
  • Premium Twin Hydro Gear ZT3100 integrated serviceable commercial duty hydro's.
  • Superior Bolstered extra High-Back seat with armrests and built in lumbar support.
  • Hustler Exclusive 22" BigBite drive tyres and 13" caster tyres.
  • 12.5 km p/h forward ground speed.
  • Beautiful quality of cut. Your lawn will be the envy of the neighbourhood.
  • Flip up floor pan and removeable seat pan plus Tool-less removable pulley covers for easy maintenance.

Specifications

  • Domestic Warranty

    3 Year or 400 hour Domestic Warranty
  • Commercial Warranty

    3 Year or 400 hour Commercial Warranty
  • Engine (cc)

    726 cc
  • Engine

    Kawasaki FR730V
  • Horsepower

    24.0hp (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel Capacity

    11.4 L
  • Blade Length

    52cm x 3 Blades
  • Dry Weight

    323 kg
  • Fuel

    Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Drive System

    Dual hydrostatic. Commercial-duty Hydro-Gear ZT3100
  • Ground Speed - Forward

    Infinitely variable 0-12.5 km/h
  • Ground Speed - Reverse

    0-8 km/h
  • Brakes

    In Service: Hydrostatic dynamic braking. Parking: Internal transmission mechanical brake. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Caster Tyres

    13 x 6.5, smooth tread
  • Tyres - Drive

    Exclusive 22 x 11 - 10 BigBite tyre
  • Seat

    Superior Bolstered extra High-Back seat with armrests and built in lumbar support.
  • Hour Meter

    Standard
  • ROPS

    No ROPS
  • Seat Suspension

    Spring suspension
  • Height

    111cm
  • Width

    158cm (with discharge chute raised)
  • Width (tyre-to-tyre)

    123cm
  • Deck System

    Side-Discharge: 60" cut. Free-floating deck using three blades with centre blade to the front. Deck is suspended at the corners. Includes 3 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Cutting Widths

    60” (1524 mm) cut side discharge
  • Deck Lift

    Foot-operated deck height adjustment in 6 mm increments from 38.1 mm to 114.3 mm.
  • Deck Construction

    10 ga, .135” (3.4 mm) welded steel with 11 ga, .120" (3.0 mm) doubler welded onto spindle mount areas. Solid 11ga. steel bars reinforce impact areas on trim edges. Commercial-style box-section reinforced front edge.
  • Cutting Height(s)

    Magnetic Pin for setting cut height
  • Blade(s)

    (3) Heavy-duty, heat treated, blades. 16.50" x 2.50" x .20"
  • Blade Tip Speed

    18,400 fpm
  • Discharge Chute

    High density, rubberised.
  • Transmission

    Hydro-Gear ZT3100
  • Kit - Mulch

    Not Standard - Available Option
  • Grass Catcher

    Not Standard - Accessory Available
  • Length

    181cm
  • All specifications are subject to change without notice.

RedMax 42" Cut RZT42

RedMax allows the homeowner to “mow like a pro” with a residential unit featured like a professional mower; With high performance engines and 10 gauge fabricated decks, the RZTs are up to the task season after season. An 18″ high-back seat keeps the operator extremely comfortable and a tubular frame assures long term durability. Easy to service, easy to operate and designed for the long haul, the RZT provides satisfaction year after year. Easily accessorized for your specific mowing needs, the RZT is ready for any mowing requirements.

Features

-Kawasaki Engine   Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.

- Zero Turn Steering System Individual, hydraulic wheel-drive provides very precise maneuvering and allows the mower to rotate around its own axis. The result is increased productivity.

-Rugged Frame and Castors The robust frame and casters ensure durability and reduced chassis flex.

-Ergonomic Control Panel The ergonomic control panel places everything conveniently at your fingertips.

-Anti-Slip Foot Area The footrest area incorporates generous non-slip surfaces for safe and comfortable use.

-Removable footpan Removable foot pan for easy access to deck belt pulleys, spindles and clean-up

-Cast Iron Spindle Housings Greasable rugged cast iron blade housings are built for durability and feature ball bearing spindle support.

 

Specifications

ENGINE
Manufacturer Kawasaki
Name FR651V
Net Power 21.5 HP V-Twin
Fuel Volume (L) 13
DRIVE LINE
Transmission Type EZT-2200
Transmission Manufacturer Hydro-Gear
Speed Forward, Max (km/h) 10
Speed Reverse, Max (km/h) 4.5
CUTTING DECK
Cutting Width (inches) 42
Cut Height, Min - Max (inches) 1.5-4.0
Cutting Deck Type / Gauge Fabricated Clear Cut/10 ga Steel
Blade Spindle Type Cast Iron
OTHER
Seat Type Vinyl Cushion
Front Tyre Size (inches) 11 x 6 - 5
Rear Tyre Size (inches) 18 x 8.5 - 8
Productivity, acres/hour (80% Efficiency) 2.2
WARRANTY
Warranty 3 Year Consumer - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.

RedMax 48" Cut RZT48

RedMax allows the homeowner to “mow like a pro” with a residential unit featured like a professional mower; With high performance engines and 10 gauge fabricated decks, the RZTs are up to the task season after season. An 18″ high-back seat keeps the operator extremely comfortable and a tubular frame assures long term durability. Easy to service, easy to operate and designed for the long haul, the RZT provides satisfaction year after year. Easily accessorized for your specific mowing needs, the RZT is ready for any mowing requirements.

 

Specifications

ENGINE
Manufacturer Kawasaki
Name FR691V
Net Power 23 HP V-Twin
Fuel Volume (L) 13
DRIVE LINE
Transmission Type EZT-2200
Transmission Manufacturer Hydro-Gear
Speed Forward, Max (km/h) 10
Speed Reverse, Max (km/h) 4.5
CUTTING DECK
Cutting Width (inches) 48
Cut Height, Min - Max (inches) 1.5 - 4.0
Cutting Deck Type / Gauge Fabricated Clear Cut/10 ga Steel
Blade Spindle Type Cast Iron
OTHER
Seat Type Vinyl Cushion
Front Tyre Size (inches) 11 x 6 - 5
Rear Tyre Size (inches) 18 x 9.5 - 8
Productivity, acres/hour (80% Efficiency) 2.5
WARRANTY
Warranty 3 Year Consumer - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.

RedMax 54"Cut RZT54

RedMax allows the homeowner to “mow like a pro” with a residential unit featured like a professional mower; With high performance engines and 10 gauge fabricated decks, the RZTs are up to the task season after season. An 18″ high-back seat keeps the operator extremely comfortable and a tubular frame assures long term durability. Easy to service, easy to operate and designed for the long haul, the RZT provides satisfaction year after year. Easily accessorized for your specific mowing needs, the RZT is ready for any mowing requirements.

 

Features

-Kawasaki Engine   Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.

- Zero Turn Steering System Individual, hydraulic wheel-drive provides very precise maneuvering and allows the mower to rotate around its own axis. The result is increased productivity.

-Rugged Frame and Castors The robust frame and casters ensure durability and reduced chassis flex.

-Ergonomic Control Panel The ergonomic control panel places everything conveniently at your fingertips.

-Anti-Slip Foot Area The footrest area incorporates generous non-slip surfaces for safe and comfortable use.

-Removable footpan Removable foot pan for easy access to deck belt pulleys, spindles and clean-up

-Cast Iron Spindle Housings Greasable rugged cast iron blade housings are built for durability and feature ball bearing spindle support.

 

Specifications

ENGINE
Manufacturer Kawasaki
Name FR730V
Net Power 24 HP V-Twin
Fuel Volume (L) 13
DRIVE LINE
Transmission Type EZT-2200
Transmission Manufacturer Hydro-Gear
Speed Forward, Max (km/h) 10
Speed Reverse, Max (km/h) 4.5
CUTTING DECK
Cutting Width (inches) 54
Cut Height, Min - Max (inches) 1.5-4.0
Cutting Deck Type / Gauge Fabricated Clear Cut/10 ga Steel
Blade Spindle Type Cast Iron
OTHER
Seat Type Vinyl Cushion
Front Tyre Size (inches) 11 x 6 - 5
Rear Tyre Size (inches) 18 x 9.5 - 8
Productivity, acres/hour (80% Efficiency) 2.8
WARRANTY
Warranty 3 Year Consumer - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

 

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.

RedMax 61"Cut RZT61X

Bringing the commercial focus to the farm and large estate; the RZTx is ready to handle the largest landowner’s mowing requirements. Developed from the commercial CZT, the RZTx cuts the large weekend chore into a quick operation. A robust engine, drivetrain, deck and components deliver commercial-like capability at home. Perfectly balanced for superior traction, featured with standard roll-over protection and seat belts, difficult terrain is no problem for the landowner. Accessories for mulch and collection make the RZTx the versatile weekend work partner.

Features

-Kawasaki Engine   Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.

- Zero Turn Steering System Individual, hydraulic wheel-drive provides very precise maneuvering and allows the mower to rotate around its own axis. The result is increased productivity.

-Comfort and Support The comfortable high back seat features standard arm rests.

-Adjustable Tracking The easily accessible adjustment allows fine-tuning of straight line tracking without tools.

-Easy Access Service Points Oil and filter maintenance, hydraulic drive system components/adjustment, electrical system and battery are all within easy reach so you can quickly get back to being productive.

-Oversized Chassis 2” x 3” tube chassis combined with large rear and front tires provide superior strength and improved ride quality.

 -Durable Cutting Deck The heavy-duty fabricated cutting deck features twin sheets of 11 gauge steel for added support of spindles and increased overall strength.

-Removeable Foot Pan Removable foot pan for easy access to deck belt pulleys, spindles and clean-up.

-Pedal Assisted Cutting Deck Lift Ergonomically designed deck lifting system offers precise cutting height adjustment. Easy and quick adjustment from the operator’s seat.

-6-Inch Wide Caster Wheels Durable 6-inch wide front casters with pneumatic tires provide long life and are easy on turf.

-Cast Iron Spindle Housings Greasable rugged cast iron blade housings are built for durability and feature ball bearing spindle support.

-Hour Meter with Service Minder Indicates when it’s time to service your zero turn

-Comfortable Steering Dual levers with foam-padded hand grips and viscous dampers that reduce vibration, create a comfortable operator experience.

 
Specifications
ENGINE
Manufacturer Kawasaki
Name FR730V
Net Power 24 HP V-Twin
Fuel Volume (L) 19
DRIVE LINE
Transmission Type ZT-3100 Integrated
Transmission Manufacturer Hydro-Gear
Speed Forward, Max (km/h) 13
Speed Reverse, Max (km/h) 6
CUTTING DECK
Cutting Width (inches) 61
Cut Height, Min - Max (inches) 1.5 - 4.5
Cutting Deck Type / Gauge Fabricated/11 ga Steel
Blade Spindle Type Cast Iron
OTHER
Seat Type Vinyl Cushion
Front Tyre Size (inches) 13 x 5 - 6
Rear Tyre Size (inches) 22 x 10 - 10
Productivity, acres/hour (80% Efficiency) 4.2
WARRANTY
Warranty 4 Years or 400 Hours - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.

 
 

RedMax 54" Cut RZT54X

Bringing the commercial focus to the farm and large estate; the RZTx is ready to handle the largest landowner’s mowing requirements. Developed from the commercial CZT, the RZTx cuts the large weekend chore into a quick operation. A robust engine, drivetrain, deck and components deliver commercial-like capability at home. Perfectly balanced for superior traction, featured with standard roll-over protection and seat belts, difficult terrain is no problem for the landowner. Accessories for mulch and collection make the RZTx the versatile weekend work partner.

Features

-Kawasaki Engine   Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.

- Zero Turn Steering System Individual, hydraulic wheel-drive provides very precise maneuvering and allows the mower to rotate around its own axis. The result is increased productivity.

-Comfort and Support The comfortable high back seat features standard arm rests.

-Adjustable Tracking The easily accessible adjustment allows fine-tuning of straight line tracking without tools.

-Easy Access Service Points Oil and filter maintenance, hydraulic drive system components/adjustment, electrical system and battery are all within easy reach so you can quickly get back to being productive.

-Oversized Chassis 2” x 3” tube chassis combined with large rear and front tires provide superior strength and improved ride quality.

 -Durable Cutting Deck The heavy-duty fabricated cutting deck features twin sheets of 11 gauge steel for added support of spindles and increased overall strength.

-Removeable Foot Pan Removable foot pan for easy access to deck belt pulleys, spindles and clean-up.

-Pedal Assisted Cutting Deck Lift Ergonomically designed deck lifting system offers precise cutting height adjustment. Easy and quick adjustment from the operator’s seat.

-6-Inch Wide Caster Wheels Durable 6-inch wide front casters with pneumatic tires provide long life and are easy on turf.

-Cast Iron Spindle Housings Greasable rugged cast iron blade housings are built for durability and feature ball bearing spindle support.

-Hour Meter with Service Minder Indicates when it’s time to service your zero turn

-Comfortable Steering Dual levers with foam-padded hand grips and viscous dampers that reduce vibration, create a comfortable operator experience.

 

Specifications

ENGINE
Manufacturer Kawasaki
Name FR730V
Net Power 24 HP V-Twin
Fuel Volume (L) 19
DRIVE LINE
Transmission Type ZT-3100 Integrated
Transmission Manufacturer Hydro-Gear
Speed Forward, Max (km/h) 13
Speed Reverse, Max (km/h) 6
CUTTING DECK
Cutting Width (inches) 54
Cut Height, Min - Max (inches) 1.5-4.0
Cutting Deck Type / Gauge Fabricated Clear Cut/10 ga Steel
Blade Spindle Type Cast Iron
OTHER
Seat Type Vinyl Cushion
Front Tyre Size (inches) 13 x 5 - 6
Rear Tyre Size (inches) 22 x 10 - 10
Productivity, acres/hour (80% Efficiency) 3.5
WARRANTY
Warranty 4 Years or 400 Hours - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.

 

RedMax 54" Cut CZTE54

RedMax brings commercial capability and affordability together in the CZTE platform; Designed with the landscaper in mind, the CZTE provides commercial application at a fraction of the cost. Commercial duty engines and drivetrains coupled with heavy duty frames provide reliability day after day, season after season. Excellent weight balance and an ergonomic layout provide ease of operation under the toughest mowing conditions, making short work out of big jobs. Add the RedMax accessories you need to tailor the CZTE to your exact mowing needs.

Features

Kawasaki Engine Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.

Parker HTE Transmission Parker HTE series drive system offers smooth quiet operation and reduced heat build-up for extended durability and increased fuel efficiency.

Cutting Deck The rugged 10 gauge fabricated cutting deck features performance tuned blades and baffles for premium cut quality and clipping dispersal.

Oversized Chassis 2” x 3” tube chassis combined with large rear and front tires provide superior strength and improved ride quality.

Roll Over Protection System (ROPS) The roll over protection system helps protect the user and can be lowered in areas with low-hanging branches.

Large Fuel Capacity Dual fuel tanks with 37 litres total capacity allows for all day running. Oversized fuel caps reduce spillage.

Rugged Front Casters Heavy Front casters feature tapered roller bearings, 1″ shafts, 3/8″ thick yokes and protected grease zerks for maximum durability.

Easy Cutting Deck Access Removable foot pan for easy access to deck belts, pulleys, spindle service and clean-up.

Premium Seat Thick cushions and EVC (elastomeric vibration control) provide unsurpassed comfort for the operator.

Ergonomic Control Panel The ergonomic control panel places everything conveniently at your fingertips.

 

Specifications

ENGINE
Manufacturer Kawasaki
Name FS651V
Net Power 22 HP V-Twin
Fuel Volume (L) 37
DRIVE LINE
Transmission Type HTE10
Transmission Manufacturer Parker
Speed Forward, Max (km/h) 16
Speed Reverse, Max (km/h) 6
CUTTING DECK
Cutting Width (inches) 54
Cut Height, Min - Max (inches) 1.5-4.5
Cutting Deck Type / Gauge Commercial Fabricated / 10 ga. Steel
Blade Spindle Type Cast Aluminium
OTHER
Seat Type EVC Anti-Vibration
Front Tyre Size (inches) 13 x 6.5 - 6
Rear Tyre Size (inches) 22 x 10 - 10
Productivity, acres/hour (80% Efficiency) 4.2
WARRANTY
Warranty 4 Years or 750 Hours - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.

RedMax 60" Cut CZT60+

RedMax brings commercial capability and affordability together in the CZT+ platform; Designed with the landscaper in mind, the CZT+ provides commercial application at a fraction of the cost. Commercial duty engines and drivetrains coupled with heavy duty frames provide reliability day after day, season after season. Excellent weight balance and an ergonomic layout provide ease of operation under the toughest mowing conditions, making short work out of big jobs. Add the RedMax accessories you need to tailor the CZT+ to your exact mowing needs.

Features

Kawasaki Engine Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.

Parker HTE Transmission Parker HTE series drive system offers smooth quiet operation and reduced heat build-up for extended durability and increased fuel efficiency.

Cutting Deck The rugged 10 gauge fabricated cutting deck features performance tuned blades and baffles for premium cut quality and clipping dispersal.

Oversized Chassis 2” x 3” tube chassis combined with large rear and front tires provide superior strength and improved ride quality.

Roll Over Protection System (ROPS) The roll over protection system helps protect the user and can be lowered in areas with low-hanging branches.

Large Fuel Capacity Dual fuel tanks with 37 litres total capacity allows for all day running. Oversized fuel caps reduce spillage.

Rugged Front Casters Heavy Front casters feature tapered roller bearings, 1″ shafts, 3/8″ thick yokes and protected grease zerks for maximum durability.

Easy Cutting Deck Access Removable foot pan for easy access to deck belts, pulleys, spindle service and clean-up.

Suspension Seat Thick cushions, EVC (elastomeric vibration control) and a weight adjustable suspension platform provide unsurpassed comfort for the operator.

Ergonomic Control Panel The ergonomic control panel places everything conveniently at your fingertips.

 

Specifications

ENGINE
Manufacturer Kawasaki
Name FX730V
Net Power 23.5 HP V-Twin
Fuel Volume (L) 37
DRIVE LINE
Transmission Type HTE12
Transmission Manufacturer Parker
Speed Forward, Max (km/h) 17
Speed Reverse, Max (km/h) 6
CUTTING DECK
Cutting Width (inches) 60
Cut Height, Min - Max (inches) 1.5-4.5
Cutting Deck Type / Gauge Commercial Fabricated / 10 ga. Steel
Blade Spindle Type Cast Aluminium
OTHER
Seat Type Suspension with EVC
Front Tyre Size (inches) 13 x 6.5 - 6
Rear Tyre Size (inches) 22 x 10 - 10
Productivity, acres/hour (80% Efficiency) 4.2
WARRANTY
Warranty 4 Years or 750 Hours - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.

 

RedMax 60" Cut CZT60X

The Redmax CZTx platform was designed specifically for the commercial landscaper. With a focus on commercial engines, heavy duty pump & wheel motor combinations, cast iron components, heavy gauge steel decks and robust frames, RedMax is designed to stand the test of time. Excellent anti-vibration designs for the entire operator platform and full suspension seats will keep the operator comfortable all day on the roughest terrain. Superior traction and ease of operation make RedMax an efficiency expert on the job, providing dependability under the toughest mowing circumstances. Available with a full line of accessories for your specific mowing requirements

Features

Kawasaki Engine The Kawasaki FX series engine is an overhead valve engine with full pressure lubrication and spin-on oil filter. It combines exceptional power and torque with fuel efficiency and reduced emissions. The heavy duty canister air filter provides maximum protection for the engine in the toughest mowing conditions.

Hydro-Gear ZT5400 Transmission The Hydro-Gear ZT-5400 series transmission offers smooth operation and long life durability.

Cutting Deck The rugged 10 gauge fabricated cutting deck features performance tuned blades and baffles for premium cut quality and clipping dispersal.

Heavy Duty 10" Cast Iron Spindle The rugged blade spindle assembly features cast iron construction and greasable tapered bearings.

Roll Over Protection System (ROPS) The roll over protection system helps protect the user and can be lowered in areas with low-hanging branches.

Heavy Duty Frame 11 Gauge, 2” x 3” tube chassis combined with large rear and front tires provide superior strength and improved ride quality.

Easy Cutting Deck Access  Removable foot pan for easy access to deck belts, pulleys, spindle service and clean-up

Convenient Service Access The open chassis design offers excellent service access. Open access on either side of the engine simplifies maintenance.

Large Fuel Capacity Dual fuel tanks with 37 litres total capacity allows for all day running. Oversized fuel caps reduce spillage.

Rugged Front Casters Heavy Front casters feature tapered roller bearings, 1″ shafts, 3/8″ thick yokes and protected grease zerks for maximum durability.

Ergonomic Control Panel The ergonomic control panel places everything conveniently at your fingertips.

Premium Suspension Seat Deep cushions and EVC (elastomeric vibration control) provide unsurpassed comfort for the operator. Additional full suspension system gives a smoother ride on rough terrain during long working hours.

 

Specifications

ENGINE
Manufacturer Kawasaki
Name FX850V
Net Power 27 HP V-Twin
Fuel Volume (L) 41
DRIVE LINE
Transmission Type ZT-5400
Transmission Manufacturer Hydro-Gear
Speed Forward, Max (km/h) 19
Speed Reverse, Max (km/h) 9
CUTTING DECK
Cutting Width (inches) 60
Cut Height, Min - Max (inches) 1.0 - 5.0
Cutting Deck Type / Gauge Commercial Fabricated / 7 ga. Steel
Blade Spindle Type Cast Iron
OTHER
Seat Type Premium Suspension with EVC
Front Tyre Size (inches) 13 x 6.5 - 6 Flat Free
Rear Tyre Size (inches) 24 x 12 - 12
Productivity, acres/hour (80% Efficiency) 5.8
WARRANTY
Warranty 5 Years or 1,500 Hours - 3 Year Engine/2 Year Transmission (engine/transmission covered by respective manufacturer)

* Continuous dedication to improve products requires that specifications and designs are subject to change without notice. All product images shown are for illustration purposes only. All images may not represent the model shown.